JB/T 7862.4-2001Agricultural machinery - Wear plates of cutter bars (English PDF)
农业机械 切割器的摩擦片
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7862.4-2001 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
September 3, 2001
Implementation date
December 1, 2001
Scope
JB/T 7862.4-2001 is the English-translated version of 农业机械 切割器的摩擦片.
JB/T 7862.4-2001 is the Chinese machinery industry standard covering agricultural machinery - Wear plates of cutter bars. It was issued on 3 September 2001 and has been in force since 1 December 2001, replacing JB/T 7862.4-1995.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2001 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 7862.4-2001
National Standard of the People's Republic of China
- Replacing
- JB/T 7862.4-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 7862.4-2001 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 3 September 2001 and has been in force since 1 December 2001.
It replaces the earlier edition JB/T 7862.4-1995.
It is one of 7 parts of the JB/T 7862 series.
2 Scope Preview
JB/T 7862.4-2001 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Where this standard sits
One other standard in this catalogue cites it: GB/T 10940-2008.
It is one part of the JB/T 7862 series, of which this catalogue holds 7 parts.
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 7862.1-1995 — Agricultural machinery - Knife guards for cutter bars
JB/T 7862.1-2001 — Agricultural machinery - Guards of cutter bars
JB/T 7862.2-1995 — Agricultural machinery - Knife sections, ledger plates and knife backs for cutter bars
JB/T 7862.2-2001 — Agricultural machinery - Knife sections, ledger plates and knife backs of cutter bars
JB/T 7862.3-1995 — Agricultural machinery - Knife clips for cutter bars
JB/T 7862.3-2001 — Agricultural machinery - Knife holders of cutter bars
Other editions:
JB/T 7862.4-1995 (earlier edition)
Standards on related subjects:
LY/T 3022-2018 — Garden machinery - Hand-held chain-saws with lithium-ion battery as power source
GB 10395.19-2010 — Agricultural and forestry machinery - Safety - Part 19:Centre pivot and moving lateral types irrigation machines
JB/T 10600-2006 — Vertical self-priming pumps
JB/T 7842-2026 — YZR-Z series special-purpose wound-rotor three-phase induction motors for crane application - Technical specification
JB/T 7874-2015 — Sowing and planting machinery - Terminology
JB/T 7873-2015 — Tillage equipment - Terminology
6 Classification and status
Chinese Standard Classification (CCS): B 91
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 7862.4
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7862.4-2001 | Agricultural machinery - Wear plates of cutter bars | current edition | Current |
| JB/T 7862.4-1995 | Agricultural machinery - Wear plates of cutter bars | previous edition | Superseded |
This page sells the current edition, JB/T 7862.4-2001. Earlier editions are listed for reference only.
How to Download JB/T 7862.4-2001
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 7862.3-1995 — Agricultural machinery - Knife clips for cutter bars
JB/T 7862.3-2001 — Agricultural machinery - Knife holders of cutter bars
JB/T 7862.2-1995 — Agricultural machinery - Knife sections, ledger plates and knife backs for cutter bars
JB/T 7862.4-2001
$245.00