Valid

JB/T 7862.3-2001Agricultural machinery - Knife holders of cutter bars (English PDF)

农业机械 切割器的压刃器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7862.3-2001 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

September 3, 2001

Implementation date

December 1, 2001

Scope

JB/T 7862.3-2001 is the English-translated version of 农业机械 切割器的压刃器.

JB/T 7862.3-2001 is the Chinese machinery industry standard covering agricultural machinery - Knife holders of cutter bars. It was issued on 3 September 2001 and has been in force since 1 December 2001, replacing JB/T 7862.3-1995.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2001 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 7862.3-2001

National Standard of the People's Republic of China

Replacing
JB/T 7862.3-1995

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 7862.3-2001 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 3 September 2001 and has been in force since 1 December 2001.

It replaces the earlier edition JB/T 7862.3-1995.

It is one of 7 parts of the JB/T 7862 series.

2 Scope Preview

JB/T 7862.3-2001 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Where this standard sits

One other standard in this catalogue cites it: GB/T 10940-2008.

It is one part of the JB/T 7862 series, of which this catalogue holds 7 parts.

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other parts of this standard:

JB/T 7862.1-1995 — Agricultural machinery - Knife guards for cutter bars

JB/T 7862.1-2001 — Agricultural machinery - Guards of cutter bars

JB/T 7862.2-1995 — Agricultural machinery - Knife sections, ledger plates and knife backs for cutter bars

JB/T 7862.2-2001 — Agricultural machinery - Knife sections, ledger plates and knife backs of cutter bars

JB/T 7862.4-1995 — Agricultural machinery - Wearing plates for cutter bars

JB/T 7862.4-2001 — Agricultural machinery - Wear plates of cutter bars

Other editions:

JB/T 7862.3-1995 (earlier edition)

Standards on related subjects:

LY/T 3022-2018 — Garden machinery - Hand-held chain-saws with lithium-ion battery as power source

GB 10395.19-2010 — Agricultural and forestry machinery - Safety - Part 19:Centre pivot and moving lateral types irrigation machines

JB/T 10600-2006 — Vertical self-priming pumps

JB/T 7842-2026 — YZR-Z series special-purpose wound-rotor three-phase induction motors for crane application - Technical specification

JB/T 7874-2015 — Sowing and planting machinery - Terminology

JB/T 7873-2015 — Tillage equipment - Terminology

6 Classification and status

Chinese Standard Classification (CCS): B 91

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 7862.3

EditionTitleRevisionStatus
JB/T 7862.3-2001Agricultural machinery - Knife holders of cutter barscurrent editionCurrent
JB/T 7862.3-1995Agricultural machinery - Knife holders of cutter barsprevious editionSuperseded

This page sells the current edition, JB/T 7862.3-2001. Earlier editions are listed for reference only.

How to Download JB/T 7862.3-2001

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7862.3-2001

$285.00