Valid

JB/T 7809-2005Characteristic parameters and measurement of projection screens (English PDF)

放映银幕特性参数和测定方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7809-2005 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

September 23, 2005

Implementation date

February 1, 2006

Scope

JB/T 7809-2005 is the English-translated version of 放映银幕特性参数和测定方法.

JB/T 7809-2005 is the Chinese standard "Characteristic parameters and measurement of projection screens". Its scope clause reads: This standard specifies the characteristic parameters and measurement of reflective and transmitting projection screens.

This standard is applicable to reflective and transmitting screens for film, slide, projection and video projection, and is not applicable to other special screens. Its clauses include terms and definitions.

Found what you need?

Document preview — JB/T 7809-2005

National Standard of the People's Republic of China

Replacing
JB/T 7809-2000

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword III
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Characteristic parameters
  • 4.1 Luminance factor beta and betaindex
  • 4.2 Effective scattering angle 2alpha and 2alphaindex
  • 4.3 Complex index K
  • 4.4 Sound attenuation
  • 5 Measurement of luminance factor beta and effective scattering angle 2alpha of reflective screens
  • 5.1 Test devices
  • 5.2 Test conditions
  • 5.3 Test procedures
  • 5.4 Reflected luminance factor characteristic curve
  • 6 Measurement of luminance factor beta and effective scattering angle 2alpha of transmitting projection screens
  • 6.1 Measuring devices
  • 6.2 Measuring conditions
  • 6.3 Measuring procedures
  • 6.4 Transmitted luminance factor characteristic curve
  • 7 Measurement of Complex index K
  • 8 Measurement of sound attenuation (only applicable to perforated reflective screens)
  • 8.1 Measuring devices
  • 8.2 Test conditions
  • 8.3 Test procedures
  • Annex A (Normative) Schematic diagrams for plotting luminance factor characteristic curves
  • Figure 1 Schematic diagram for measuring the luminance factor beta of a reflective screen (in horizontal plane)
  • Figure 2 Schematic diagram for measuring the effective scattering angle 2alpha of a reflective screen (in horizontal plane)
  • Figure 3 Schematic diagram for measuring luminance factor beta of a transmitting screen (in horizontal plane)
  • Figure 5 Schematic diagram for sound attenuation measuring installations
  • Figure A.1 Polar coordinate system
  • Figure A.2 Rectangular coordinate system
  • Table 1 beta intervals for diffuse reflective screens
  • Table 2 beta intervals for diffuse transmitting screens
  • Table 3 beta intervals for gain reflective screens
  • Table 4 beta intervals for gain transmitting screens
  • Table 5 2alpha and additional conditions for diffuse reflective screens
  • Table 6 2alpha intervals for diffuse transmitting screens
  • Table 7 2alpha intervals for gain reflective screens
  • Table 8 2alpha intervals for gain transmitting screens

1 Scope

This standard specifies the characteristic parameters and measurement of reflective and transmitting projection screens.

This standard is applicable to reflective and transmitting screens for film, slide, projection and video projection, and is not applicable to other special screens.

2 Normative references

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.

JB/T 6839 The classification of projection screens

3 Terms and definitions

For the purposes of this standard, the following terms and definitions apply.

3.1 projection screens

light reflecting and transmitting screens with specified optical characteristics for projection

3.2 type D screen

a type of screen, also known as diffuse reflective screen, which diffuses incident light in the space of 2pi solid angle, with a polar coordinate characteristic curve of luminance factor approximate to an ideal diffuse reflection semicircle

3.3 type B screen

a type of screen, also known as gain reflective screen at incident angle, by which the reflection of the incident light is characterized by a collective gain reflection at the incident angle of light in the space of 2pi solid angle

3.4 type S screen

a type of screen, also known as gain reflective screen at the angle of reflection, by which the reflection of the incident light is characterized by a collective gain reflection at the angle of reflection of light in the space of 2pi solid angle, with an angle of reflection equal to the incident angle

3.5 type R screen

a type of screen, also known as transmitting screen, which is viewed with transmitted light with a collective gain direction consistent with the incident light direction

3.6 luminance factor beta

as defined in JB/T 6839, Clause 2

3.7 effective scattering angle 2alpha

as defined in JB/T 6839, Clause 2

3.8 Complex index K

sum of allowable combinations of betaindex and 2alphaindex for reflective or transmitting projection screens

Namely: K=betaindex+2alphaindex

3.9 sound attenuation

sound attenuation, in case of perforated screens, caused by the loudspeaker being placed behind the screen, which is defined as the difference between the sound attenuation at 8kHz/12.5kHz and that at 500Hz, expressed in dB […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 7809

EditionTitleRevisionStatus
JB/T 7809-2005Characteristic parameters and measurement of projection screenscurrent editionCurrent
JB/T 7809-2000Characteristic parameters and measurement of projection screensprevious editionSuperseded

This page sells the current edition, JB/T 7809-2005. Earlier editions are listed for reference only.

How to Download JB/T 7809-2005

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7809-2005

$125.00