JB/T 7697-2013Metal Type Cooling Fan for Construction Machinery - Technical Specification (English PDF)
工程机械用金属冷却风扇 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7697-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 7697-2013 is the English-translated version of 工程机械用金属冷却风扇 技术条件.
JB/T 7697-2013 is the recommended Chinese machinery industry standard that sets the technical specification for metal cooling fans used on construction machinery.
It classifies these fans and states the requirements they must satisfy, then gives the test methods and the inspection rules. Marking, packaging and storage are dealt with at the end.
It applies to metal cooling fans for construction machinery larger than 254 mm in diameter. Among the standards it quotes are GB/T 1236, GB/T 2828.1-2012, GB/T 2829, GB/T 13914, GB/T 15822.1, JB/T 5946 and JB/T 51007.
It replaces JB/T 7697-2001. Its Chinese classification is P97 and its international classification 53.100.
Found what you need?
Document preview — JB/T 7697-2013
National Standard of the People's Republic of China
- ICS
- 53.100
- Replacing
- JB/T 7697-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 7697-2013 was issued by MIIT on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 7697-2001.
2 Scope
This standard is the recommended Chinese machinery industry standard that sets the technical specification for metal cooling fans used on construction machinery. It classifies these fans and states the requirements they must satisfy, then gives the test methods and the inspection rules. Marking, packaging and storage are dealt with at the end. It applies to metal cooling fans for construction machinery larger than 254 mm in diameter. Among the standards it quotes are GB/T 1236, GB/T 2828.1-2012, GB/T 2829, GB/T 13914, GB/T 15822.1, JB/T 5946 and JB/T 51007. It replaces JB/T 7697-2001. Its Chinese classification is P97 and its international classification 53.100.
3 Normative references
JB/T 7697-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1236
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 2829
GB/T 13914
GB/T 15822.1
JB/T 5946
JB/T 51007
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 7697-2001 (earlier edition)
6 Classification and status
International classification (ICS): 53.100
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1236Industrial fan -- Performance testing using standardized airways
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829Sampling procedures and tables for periodic inspection by attributes
- GB/T 13914Tolerance of dimensions for stamping parts
- GB/T 15822.1Non-destructive testing - Magnetic particle testing - Part 1: General principles
- JB/T 5946Construction machinery - General technical requirements for painting
JB/T 51007
Similar standards
Editions of JB/T 7697
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7697-2013 | Metal Type Cooling Fan for Construction Machinery - Technical Specification | current edition | Current |
| JB/T 7697-2001 | Metal Type Cooling Fan for Construction Machinery - Technical Specification | previous edition | Superseded |
This page sells the current edition, JB/T 7697-2013. Earlier editions are listed for reference only.
How to Download JB/T 7697-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1236-2017 — Industrial fan -- Performance testing using standardized airways
GB/T 13914-2013 — Tolerance of dimensions for stamping parts
GB/T 15822.1-2005 — Non-destructive testing -- Magnetic particle testing -- Part 1: General principles
Secure payment via Stripe
Payments accepted
JB/T 7697-2013
$165.00