JB/T 7557-1994Measurement of coaxiality deviation (English PDF)
同轴度误差检测
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7557-1994 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 9, 1994
Implementation date
October 1, 1995
Scope
JB/T 7557-1994 is the English-translated version of 同轴度误差检测.
JB/T 7557-1994 is the Chinese machinery industry standard covering measurement of coaxiality deviation. It was issued on 9 December 1994 and has been in force since 1 October 1995, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1994 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 7557-1994
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 7557-1994 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 December 1994 and has been in force since 1 October 1995.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
JB/T 7557-1994 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other editions:
JB/T 7557-2024 (later edition)
Standards on related subjects:
GB/T 7307-2001 — Pipe threads with 55-degree thread angle where pressure-tight joints are not made on the threads
GB/T 7306.2-2000 — Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads. Part 2: Taper internal and external threads
JB/T 6063.3-2025 — Nondestructive Testing - Materials for magnetic particle testing - Part 3: Dry non-fluorescent magnetic powder for wet method
JB/T 6063.2-2025 — Nondestructive Testing - Materials for magnetic particle testing - Part 2: Oil-based non-fluorescent magnetic powder for wet method
JB/T 6063.1-2025 — Nondestructive Testing - Materials for magnetic particle testing - Part 1: Non-fluorescent magnetic powder for dry method
5 Classification and status
Chinese Standard Classification (CCS): J 04
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 47117-2026Inspection methods for active magnetic bearing stators
- JB/T 13592.2-2019CNC double-sided planer-type horizontal boring and milling machines - Part 2: Testing of the accuracy
- GB/T 36059-2018Gravure printing process quality control and inspection methods for paper packaging
- CJ/T 203-2016Non clogging pumps
- JB/T 12722-2016Anchorage testing machines - Technical specification
- HG/T 4380-2012Liquid-solid mini-hydrocyclones - Technical specifications
How to Download JB/T 7557-1994
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 7557-1994
$195.00