Valid

JB/T 7352-2010Solenoid valves for industrial-process measurement and control systems (English PDF)

工业过程控制系统用电磁阀

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7352-2010 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 11, 2010

Implementation date

July 1, 2010

Scope

JB/T 7352-2010 is the English-translated version of 工业过程控制系统用电磁阀.

JB/T 7352-2010 is the Chinese standard "Solenoid valves for industrial-process measurement and control systems".

Its scope clause reads: This standard specifies the terms and definitions, classification and basic parameters, requirements, test methods, inspection rules as well as marking, packaging, transportation, storage and warranty period of the solenoid valve for industrial-process measurement and control systems (hereinafter referred to as the "solenoid valve").

This standard is applicable to the solenoid valves for which the clean liquid, gas and steam are taken as the working media and whose on/off control function is realized in the pipeline.

This standard is not applicable to hydraulic and pneumatic solenoid directional valves.

Found what you need?

Document preview — JB/T 7352-2010

National Standard of the People's Republic of China

Replacing
JB/T 7352-1994

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Classification and Basic Parameters
  • 4.1 Classification
  • 4.2 Basic Parameters
  • 5 Requirements
  • 5.1 Working Pressure Differential
  • 5.2 Insulation Resistance
  • 5.3 Insulation Strength
  • 5.4 Leakage
  • 5.5 Tightness
  • 5.6 Pressure Strength
  • 5.7 Humidity Impact
  • 5.8 Permissible Temperature of the Coil
  • 5.9 Rated Flow Coefficient
  • 5.10 Action Life
  • 5.11 Response Time
  • 5.12 Mechanical Vibration Impact
  • 5.13 Transportation Temperature Impact
  • 5.14 Transportation Impact
  • 5.15 Appearance
  • 5.16 Protectiveness
  • 6 Test Methods
  • 6.1 Test Conditions and General Requirements
  • 6.2 Working Pressure Differential Test
  • 6.3 Insulation Resistance Test
  • 6.4 Insulation Strength Test
  • 6.5 Leakage Test
  • 6.6 Tightness Test
  • 6.7 Pressure Strength Test
  • 6.8 Humidity Impact Test
  • 6.9 Determination for the Permissible Temperature of the Coil
  • 6.10 Rated Flow Coefficient Test
  • 6.11 Action Life Test
  • 6.12 Response Time Test
  • 6.13 Mechanical Vibration Impact Test
  • 6.14 Transportation Temperature Impact Test
  • 6.15 Transportation Impact Test
  • 6.16 Appearance Inspection
  • 6.17 Protectiveness Test
  • 7 Inspection Rules
  • 7.1 Inspection Types
  • 7.2 Inspection Items
  • 7.3 Batching Rules
  • 7.4 Delivery Inspection
  • 7.5 Type Inspection
  • 8 Marking, Packaging, Storage and Quality Warranty
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transportation and Storage
  • 8.4 Quality Warranty
  • Appendix A (Normative) Nonconformity Classification

1 Scope

This standard specifies the terms and definitions, classification and basic parameters, requirements, test methods, inspection rules as well as marking, packaging, transportation, storage and warranty period of the solenoid valve for industrial-process measurement and control systems (hereinafter referred to as the "solenoid valve").

This standard is applicable to the solenoid valves for which the clean liquid, gas and steam are taken as the working media and whose on/off control function is realized in the pipeline.

This standard is not applicable to hydraulic and pneumatic solenoid directional valves.

2 Normative References

The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrigendum), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated reference, the latest edition of the normative document referred to applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 7352

EditionTitleRevisionStatus
JB/T 7352-2010Solenoid valves for industrial-process measurement and control systemscurrent editionCurrent
JB/T 7352-1994Solenoid valves for industrial-process measurement and control systemsprevious editionSuperseded

This page sells the current edition, JB/T 7352-2010. Earlier editions are listed for reference only.

How to Download JB/T 7352-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7352-2010

$185.00