JB/T 7332-2016Manual monorail trolleys (English PDF)
手动单轨小车
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7332-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 22, 2016
Implementation date
April 1, 2017
Scope
JB/T 7332-2016 is the English-translated version of 手动单轨小车.
Manual trolleys are the subject of JB/T 7332-2016. The standard gives terms and definitions, types and basic parameters, technical requirements, test methods, inspection rules and provisions on markings, packaging, transportation and storage.
It applies to manual trolleys with a rated load of 0.25 t to 50 t driven by hand zipper, and to hand-pushed trolleys for lifting heavy objects with a rated load of 0.25 t to 10 t, in both cases running on the lower flange of horizontally installed rails such as I-beams.
The standard replaces JB/T 7332-2007; it was issued on 22 October 2016 and implemented on 1 April 2017.
Found what you need?
Document preview — JB/T 7332-2016
National Standard of the People's Republic of China
- Replacing
- JB/T 7332-2007
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword3
- 1 Scope4
- 2 Normative references4
- 3 Terms and definitions4
- 4 Types and basic parameters5
- 4.1 Types5
- 4.2 Basic parameters7
- 5 Technical requirements8
- 5.1 Operating ambient temperature8
- 5.2 Operating performance8
- 5.3 Strength of the whole machine9
- 5.4 Main parts9
- 5.5 Painting and appearance10
- 5.6 Safety protection10
- 6 Test methods11
- 6.1 Test load11
- 6.2 Visual inspection11
- 6.3 Operating performance test11
- 6.4 Strength test of whole machine12
- 6.5 Determination of paint film adhesion13
- 7 Inspection rules13
- 7.1 Inspection classification13
- 7.2 Exit-factory inspection14
- 7.3 Type inspection14
- 8 Marking, packaging, transportation, storage15
- 8.1 Marking15
- 8.2 Packaging15
- 8.3 Transportation and storage15
1 Scope
This standard specifies the terms and definitions, types and basic parameters, technical requirements, test methods, inspection rules, markings, packaging, transportation, storage of manual trolleys.
This standard applies to the manual trolleys, which have a rated load of 0.25 t ~ 50 t AND are driven by hand zipper, as well as the manual trolleys, which have a rated load of 0.25 t ~ 10 t AND driven by hand-pushed lifting heavy objects, running on the lower flange of the horizontally installed rails, such as I- beams (hereinafter referred to as trolley).
2 Normative references
The following documents are indispensable for the application of this document.
For dated reference documents, only the dated version applies to this document.
For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 9286 Paints and varnishes - Cross cut test for films
GB/T 13306 Plate
GB/T 13384 General specifications for packing of mechanical and electrical product
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Rated capacity
The sum of the weight that the monorail trolley can carry AND the mass of the lifting device.
3.2 Running height
The vertical distance, FROM the contact point between the working plane of the monorail trolley's wheel and the running I-beam track TO the standing plane of the operator.
3.3 Minimum turning radius
The minimum radius of curvature on the inner side of the lower flange of the I-beam and other curved sections, where the monorail trolley is running.
3.4 Passage space
The vertical distance, FROM the contact point between the working plane of the monorail trolley's wheel and the running I-beam track TO the top of the lifting ring.
3.5 Over turn
A phenomenon in which the working plane of a monorail trolley's wheel deviates from the running I-beam or other track, thereby making it unable to operate normally.
3.6 Hand pull
The pulling force, which is required to operate the monorail trolley at a uniform speed, by applying to the hand-chain.
Note: For the hand pull of the monorail trolley, which has the hand-chain of combined structure, it refers to the pulling force on a single body, when the hand-chains on the two bodies are simultaneously pulled, with the same force, to drive the whole machine to run.
4 Types and basic parameters
4.1 Types
The types of monorail trolleys are divided into the following two types, according to the driving mode: equipped with an anti-overturning device.
5 Technical requirements
5.6 Safety protection
5.6.2 The hand-chain trolley shall be equipped with a chain stop device, to prevent the hand chain from falling out of the ring groove of the hand sprocket wheel.
6 Test methods
6.1 Test load
The test load can adopt the direct loading method by heavy objects, OR hydraulic pressure, OR other loading methods that can generate the test load.
When loaded by the heavy object method, the allowable deviation of the test load is ± 1%. When hydraulic pressure OR other loading methods, that can generate test loads, are used, the allowable deviation of the test load is 0 ~ 10%. The heavy object loading method shall be adopted as the basis for arbitration.
6.2 Visual inspection
The visual inspection shall include whether the specifications and/or status of all important components meet the requirements, such as:
- Wheels, hand chain;
- All protective devices, including anti-overturning devices, chain stop devices, etc.
6.3 Operating performance test
6.3.1 Operating performance test under no-load
The monorail trolley runs, in a reciprocated manner, on a straight line AND the minimum turning radius as specified in Table 1 or Table 2, under no-load conditions. The cumulative running length shall not be less than that specified in Table 3.
6.3.2 Operating performance test under dynamic load
The test load specified in Table 3 is applied to the lifting ring of the monorail trolley. The monorail trolley is driven to reciprocate on the straight-line track, by pulling the hand chain OR pushing a heavy object. The cumulative running length shall not be less than that specified in Table 3.
6.3.3 Operating performance test along curve
A test load of rated capacity is applied to the lifting ring of the monorail trolley.
The monorail trolley is driven to reciprocate on the track, which has the minimum turning radius as given in Table 1 or Table 2, by pulling the hand chain OR pushing a heavy object. The cumulative running length shall not be less than 4 m.
6.3.4 Determination of hand pull
When measuring the hand pull, the track, on which the tested hand-chain trolley runs, shall meet the following requirements:
- The slope does not exceed 3/1000;
- The track surface shall be flat AND free of oxide scale, rust, dirt and other debris.
The hand pull is measured by the heavy weight method. The measurement method is as follows: Apply a test load of rated capacity to the hand-chain trolley.
Tighten the hand chain on one side. Hang a heavy weight on the other hand chain. Instantly loosen the tightened hand chain. If the hand-chain trolley is running, the weight of the heavy weight, which is hung at this time, is regarded as the hand pull as measured this time. When the hand-chain trolley moves in the reverse direction, measure the hand pull again. The average of the two hand pulls is the hand pull of the tested hand-chain trolley.
For the hand-chain trolley of combined structure, it is allowed to test the hand pull of one body, after disassembly. At this time, the test load is one-half of the test load of the whole machine.
6.4 Strength test of whole machine
The performance test under static load is carried out on the testing machine, as shown in Figure 4. When the monorail trolley has a combined structure, the body and the lifting ring are allowed to be tested separately. However, the stressing method during the test shall be similar to the stressing method in actual use. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Editions of JB/T 7332
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7332-2016 | Manual monorail trolleys | current edition | Current |
| JB/T 7332-2007 | Manual monorail trolleys | previous edition | Superseded |
This page sells the current edition, JB/T 7332-2016. Earlier editions are listed for reference only.
How to Download JB/T 7332-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 7332-2016
$215.00