JB/T 7311-2016Construction machinery - Anaerobic adhesives, silicone rubber and pre-applied dry film adhesives - Application technical specifications (English PDF)
工程机械 厌氧胶、硅橡胶及预涂干膜胶 应用技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7311-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 22, 2016
Implementation date
April 1, 2017
Scope
JB/T 7311-2016 is the English-translated version of 工程机械 厌氧胶、硅橡胶及预涂干膜胶 应用技术规范.
JB/T 7311-2016 is a recommended standard of the Chinese machinery industry on the use of anaerobic adhesives, silicone rubber and pre-applied dry film adhesives in construction machinery.
For the static seals of such machines it fixes how these products are used, the way they are specified, the performance requirements, the test methods, and how they are called up on drawings.
Its field takes in the sealing and locking of metal threaded fasteners, the plane sealing of parts, the retaining and sealing of shaft and hole metal parts, and the thread sealing of metal pipework; other mechanical products may use it as a reference.
Among the standards it quotes are GB/T 528, GB/T 2794, GB/T 7124 and GB/T 18747.1. It supersedes JB/T 7311-2008.
Found what you need?
Document preview — JB/T 7311-2016
National Standard of the People's Republic of China
- ICS
- 53.100
- Replacing
- JB/T 7311-2008
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 7311-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 October 2016 and has been in force since 1 April 2017.
It replaces the earlier edition JB/T 7311-2008, JB/T 7311-2001.
2 Scope
This standard is a recommended standard of the Chinese machinery industry on the use of anaerobic adhesives, silicone rubber and pre-applied dry film adhesives in construction machinery. For the static seals of such machines it fixes how these products are used, the way they are specified, the performance requirements, the test methods, and how they are called up on drawings. Its field takes in the sealing and locking of metal threaded fasteners, the plane sealing of parts, the retaining and sealing of shaft and hole metal parts, and the thread sealing of metal pipework; other mechanical products may use it as a reference. Among the standards it quotes are GB/T 528, GB/T 2794, GB/T 7124 and GB/T 18747.1. It supersedes JB/T 7311-2008.
3 Normative references
JB/T 7311-2016 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 528
GB/T 1692
GB/T 2794
GB/T 7124
GB/T 12716
GB/T 18747.1
GB/T 18747.2
ASTM C1183
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 7311-2008 (earlier edition)
JB/T 7311-2001 (earlier edition)
6 Classification and status
International classification (ICS): 53.100
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 1692Vulcanized rubber-Determination of the insulation resistivity
- GB/T 2794Determination for viscosity of adhesives
- GB/T 7124Adhesives -- Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
- GB/T 12716Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads
- GB/T 18747.1The determination of torque strength of anaerobic adhesives (Threaded fasteners)
ASTM C1183
Cited by
Similar standards
Editions of JB/T 7311
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7311-2016 | Construction machinery - Anaerobic adhesives, silicone rubber and pre-applied dry film adhesives - Application technical specifications | current edition | Current |
| JB/T 7311-2008 | Construction machinery - Anaerobic adhesives, silicone rubber and pre-applied dry film adhesives - Application technical specifications | previous edition | Superseded |
This page sells the current edition, JB/T 7311-2016. Earlier editions are listed for reference only.
How to Download JB/T 7311-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12716-2002 — Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on the threads
GB/T 12716-2011 — Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads
GB/T 1692-1992 — Vulcanized rubber-Determination of the insuiation resistivity
Secure payment via Stripe
Payments accepted
JB/T 7311-2016
$305.00