Valid

JB/T 7175.3-1996Rolling linear guideways for machine tools - Mounting and connection dimensions (English PDF)

机床用滚动直线导轨副 安装连接尺寸

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7175.3-1996 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

November 7, 1996

Implementation date

January 1, 1997

Scope

JB/T 7175.3-1996 is the English-translated version of 机床用滚动直线导轨副 安装连接尺寸.

JB/T 7175.3-1996 is the Chinese machinery industry standard, of the recommended kind, that gives the mounting and connection dimensions of rolling linear guideways for machine tools.

It covers the four way equal load type of linear rolling guide in sizes 20 to 65, and states the dimensions by which such a guideway is installed and connected to the structure that carries it.

Its field of use is the four way equal load rolling linear guide employed on machine tools, and other electromechanical products fitted with guideways of the same type may follow it by reference.

It quotes JB/T 7175.1-1993, its only quoted standard, and falls under classification J51. Issued on 7 November 1996, it has applied since 1 January 1997.

Found what you need?

Document preview — JB/T 7175.3-1996

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 7175.3-1996 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 1996.

It is one of 8 parts of the JB/T 7175 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the Chinese machinery industry standard, of the recommended kind, that gives the mounting and connection dimensions of rolling linear guideways for machine tools. It covers the four way equal load type of linear rolling guide in sizes 20 to 65, and states the dimensions by which such a guideway is installed and connected to the structure that carries it. Its field of use is the four way equal load rolling linear guide employed on machine tools, and other electromechanical products fitted with guideways of the same type may follow it by reference. It quotes JB/T 7175.1-1993, its only quoted standard, and falls under classification J51.

JB/T 7175.3-1996 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,316 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Normative references

JB/T 7175.1-1993 — Rolling linear guideway assemblies for machine tools - Parameters

4 Where this standard sits

It cites one other standard, JB/T 7175.1-1993, listed in full above.

It is one part of the JB/T 7175 series, of which this catalogue holds 8 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 7175.1-1993 — Rolling linear guideway assemblies for machine tools - Parameters

JB/T 7175.1-2011 — Rolling linear guideways - Part 1: Terms and symbols

JB/T 7175.2-1993 — Rolling linear guideway assemblies for machine tools - Technical specifications for acceptance

JB/T 7175.2-2006 — Rolling linear guideways - Part 2: Parameters

JB/T 7175.4-2006 — Rolling linear guideways - Part 4: Technical acceptance requirements

JB/T 7175.5-2015 — Linear rolling guide - Part 5: Basic static load rating

JB/T 7175.6-2015 — Linear rolling guide - Part 6: Dynamic load ratings and rating life

7 Classification and status

Chinese Standard Classification (CCS): J 51

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 7175.3-1996

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7175.3-1996

$115.00