JB/T 7175.1-2011Rolling linear guideways - Part 1: Terms and symbols (English PDF)
滚动直线导轨副 第1部分:术语和符号
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7175.1-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 7175.1-2011 is the English-translated version of 滚动直线导轨副 第1部分:术语和符号.
JB/T 7175.1-2011 is the Chinese machinery industry standard covering rolling linear guideways, Part 1: Terms and symbols. It was issued on 18 May 2011 and has been in force since 1 August 2011, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2011 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 7175.1-2011
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 7175.1-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It replaces the earlier edition JB/T 7175.1-1993.
It is one of 7 parts of the JB/T 7175 series.
2 Scope Preview
JB/T 7175.1-2011 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Where this standard sits
2 other standards in this catalogue cite it, among them JB/T 7175.5-2015, JB/T 7175.6-2015.
It is one part of the JB/T 7175 series, of which this catalogue holds 7 parts.
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 7175.2-1993 — Rolling linear guideway assemblies for machine tools - Technical specifications for acceptance
JB/T 7175.2-2006 — 2: Parameters
JB/T 7175.3-1996 — Rolling linear guideways for machine tools - Mounting and connection dimensions
JB/T 7175.4-2006 — 4: Technical acceptance requirements
JB/T 7175.5-2015 — Linear rolling guide - Part 5: Basic static load rating
JB/T 7175.6-2015 — Linear rolling guide - Part 6: Dynamic load ratings and rating life
Other editions:
JB/T 7175.1-1993 (earlier edition)
Standards on related subjects:
GB/T 17587.3-2017 — Ball screws -- Part 3: Acceptance conditions and acceptance tests
JB/T 12396-2015 — Proportional valve solenoids
JB/T 6105-2007 — Hydraulic power units for NC machine tools - Technical requirements
JB/T 3022-2021 — Micro Switch
6 Classification and status
Chinese Standard Classification (CCS): J 51
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 7175.1-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 7175.2-2006 — Rolling linear guideways - Part 2: Parameters
JB/T 7175.2-1993 — Rolling linear guideway assemblies for machine tools - Technical specifications for acceptance
JB/T 7175.3-1996 — Rolling linear guideways for machine tools - Mounting and connection dimensions
JB/T 7175.1-2011
$195.00