JB/T 7175.4-2006Rolling linear guideways - Part 4: Technical acceptance requirements (English PDF)
滚动直线导轨副 第4部分:验收技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7175.4-2006 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 27, 2006
Implementation date
May 1, 2007
Scope
JB/T 7175.4-2006 is the English-translated version of 滚动直线导轨副 第4部分:验收技术条件.
JB/T 7175.4-2006 is the Chinese machinery industry standard covering rolling linear guideways, Part 4: Technical acceptance requirements. It was issued on 27 November 2006 and has been in force since 1 May 2007, replacing JB/T 7175.2-1993.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2006 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 7175.4-2006
National Standard of the People's Republic of China
- Replacing
- JB/T 7175.2-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 7175.4-2006 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 27 November 2006 and has been in force since 1 May 2007.
It is one of 8 parts of the JB/T 7175 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 7175.4-2006 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Where this standard sits
One other standard in this catalogue cites it: JB/T 12668.2-2016.
It is one part of the JB/T 7175 series, of which this catalogue holds 8 parts.
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 7175.1-1993 — Rolling linear guideway assemblies for machine tools - Parameters
JB/T 7175.1-2011 — 1: Terms and symbols
JB/T 7175.2-1993 — Rolling linear guideway assemblies for machine tools - Technical specifications for acceptance
JB/T 7175.2-2006 — 2: Parameters
JB/T 7175.3-1996 — Rolling linear guideways for machine tools - Mounting and connection dimensions
JB/T 7175.5-2015 — Linear rolling guide - Part 5: Basic static load rating
JB/T 7175.6-2015 — Linear rolling guide - Part 6: Dynamic load ratings and rating life
Standards on related subjects:
GB/T 17587.3-2017 — Ball screws -- Part 3: Acceptance conditions and acceptance tests
JB/T 12396-2015 — Proportional valve solenoids
JB/T 6105-2007 — Hydraulic power units for NC machine tools - Technical requirements
6 Classification and status
Chinese Standard Classification (CCS): J 51
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 7175.4
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7175.4-2006 | Rolling linear guideways - Part 4: Technical acceptance requirements | current edition | Current |
| JB/T 7175.2-1993 | Rolling linear guideways - Part 4: Technical acceptance requirements | previous edition | Superseded |
This page sells the current edition, JB/T 7175.4-2006. Earlier editions are listed for reference only.
How to Download JB/T 7175.4-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 7175.5-2015 — Linear rolling guide - Part 5: Basic static load rating
JB/T 7175.3-1996 — Rolling linear guideways for machine tools - Mounting and connection dimensions
JB/T 7175.6-2015 — Linear rolling guide - Part 6: Dynamic load ratings and rating life
JB/T 7175.4-2006
$115.00