Valid

JB/T 7134.1-2008Metal cutting machine tools - Iron castings - Part 1: Evaluation of porosity grades (English PDF)

金属切削机床 铸铁件 第1部分:疏松级别评定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7134.1-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

June 4, 2008

Implementation date

November 1, 2008

Scope

JB/T 7134.1-2008 is the English-translated version of 金属切削机床 铸铁件 第1部分:疏松级别评定.

JB/T 7134.1-2008 is the first part of a recommended Chinese machinery industry standard on iron castings for metal cutting machine tools, and it covers the evaluation of porosity grades.

It gives the methods for assessing porosity on the machined working surfaces of important cast iron parts and the range that may be allowed.

It is written for guideway surfaces, working surfaces, rolling bearing spindle bores, bores for hydraulic components and other machined surfaces, while non-exposed machined surfaces such as inlaid steel rails, linear guides, surfaces bonded with soft plastic and fixed joint faces lie outside it.

Classified J50 and 25.080.01, it replaces JB/T 7134.1-1993 and quotes JB/T 7134.2-2008.

Found what you need?

Document preview — JB/T 7134.1-2008

National Standard of the People's Republic of China

ICS
25.080.01
Replacing
JB/T 7134.1-1993

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 7134.1-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.

It replaces the earlier edition JB/T 7134.1-1993.

It is one of 3 parts of the JB/T 7134 series.

2 Scope Preview

This standard is the first part of a recommended Chinese machinery industry standard on iron castings for metal cutting machine tools, and it covers the evaluation of porosity grades. It gives the methods for assessing porosity on the machined working surfaces of important cast iron parts and the range that may be allowed. It is written for guideway surfaces, working surfaces, rolling bearing spindle bores, bores for hydraulic components and other machined surfaces, while non-exposed machined surfaces such as inlaid steel rails, linear guides, surfaces bonded with soft plastic and fixed joint faces lie outside it. Classified J50 and 25.080.01, it replaces JB/T 7134.1-1993 and quotes JB/T 7134.2-2008.

JB/T 7134.1-2008 falls under ICS 25.080.01, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

JB/T 7134.2-2008 — Metal cutting machine tools - Iron castings - Part 2: Comparison samples of porosity grades

4 Where this standard sits

It cites one other standard, JB/T 7134.2-2008, listed in full above.

One other standard in this catalogue cites it: JB/T 3997-2011.

It is one part of the JB/T 7134 series, of which this catalogue holds 3 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 7134.2-1993 — Metal-cutting machine tools - Iron castings - Part 2: Comparison specimens for porosity grades

JB/T 7134.2-2008 — Part 2: Comparison samples of porosity grades

Other editions:

JB/T 7134.1-1993 (earlier edition)

Standards on related subjects:

GB 15760-2025 — Metal cutting machines - General specifications for safeguarding

GB/T 9061-2025 — Metal-cutting machine tools - General specifications

GB/T 5900.1-2021 — Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection

JB/T 8072-2021 — Machine tools - Presentation of lubrication requirements

JB/T 6609-2021 — Steels and heat treatment for machine tool parts

7 Classification and status

International classification (ICS): 25.080.01

Chinese Standard Classification (CCS): J 50

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 7134.1

EditionTitleRevisionStatus
JB/T 7134.1-2008Metal cutting machine tools - Iron castings - Part 1: Evaluation of porosity gradescurrent editionCurrent
JB/T 7134.1-1993Metal cutting machine tools - Iron castings - Part 1: Evaluation of porosity gradesprevious editionSuperseded

This page sells the current edition, JB/T 7134.1-2008. Earlier editions are listed for reference only.

How to Download JB/T 7134.1-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7134.1-2008

$55.00