JB/T 7080-2013Impulse voltage testers for winding interturn insulation (English PDF)
绕组匝间绝缘冲击电压试验仪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7080-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
JB/T 7080-2013 is the English-translated version of 绕组匝间绝缘冲击电压试验仪.
JB/T 7080-2013 is a recommended Chinese machinery industry standard for impulse voltage testers used on winding interturn insulation. It lays down the specifications and parameters of these testers, the technical requirements they must meet, the test methods, the inspection rules and further requirements of the same kind.
The standard applies to testers characterised by their nominal peak output voltage. It carries the Chinese classification K64 and the international classification 25.140.20.
Among the standards it quotes are GB 3100-1993 and GB 4793.1-2007. JB/T 7080-2013 replaces the 1993 edition of the same number, JB/T 7080-1993, and the Ministry of Industry and Information Technology issued it.
Found what you need?
Document preview — JB/T 7080-2013
National Standard of the People's Republic of China
- ICS
- 25.140.20
- Replacing
- JB/T 7080-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 7080-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.
It replaces the earlier edition JB/T 7080-1993.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for impulse voltage testers used on winding interturn insulation. It lays down the specifications and parameters of these testers, the technical requirements they must meet, the test methods, the inspection rules and further requirements of the same kind. The standard applies to testers characterised by their nominal peak output voltage. It carries the Chinese classification K64 and the international classification 25.140.20. Among the standards it quotes are GB 3100-1993 and GB 4793.1-2007. JB/T 7080-2013 replaces the 1993 edition of the same number, JB/T 7080-1993, and the Ministry of Industry and Information Technology issued it.
JB/T 7080-2013 falls under ICS 25.140.20, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 3100-1993 — SI units and recommendations for the use of their multiples and of certain other units
GB 4793.1-2007 — Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 7080-1993 (earlier edition)
Standards on related subjects:
GB/T 4343.2-2020 — Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity
GB/T 3883.311-2019 — Safety of motor-operated hand-held, transportable and garden tools -- Part 311: Particular requirements for transportable cut-off machines
GB/T 3787-2017 — Technical safety code for management, operation, inspection and maintenance of hand-held motor-operated electric tools
JB/T 7086-2013 — The guide for assembly process of hand-held motor-operated electric tools
JB/T 7083-2013 — Impulse-voltage tester for low-voltage electrical installations
JB/T 7082-2013 — Dielectric withstand voltage testers
6 Classification and status
International classification (ICS): 25.140.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 7080
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7080-2013 | Impulse voltage testers for winding interturn insulation | current edition | Current |
| JB/T 7080-1993 | Impulse voltage testers for winding interturn insulation | previous edition | Superseded |
This page sells the current edition, JB/T 7080-2013. Earlier editions are listed for reference only.
How to Download JB/T 7080-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 3100-1993 — SI units and recommendations for the use of their multiples and of certain other units
GB 4793.1-2007 — Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
Secure payment via Stripe
Payments accepted
JB/T 7080-2013
$105.00