Valid

JB/T 7056-2008Pneumatic tube fittings - General technical requirements (English PDF)

气动管接头 通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7056-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

June 4, 2008

Implementation date

November 1, 2008

Scope

JB/T 7056-2008 is the English-translated version of 气动管接头 通用技术条件.

Tube fittings for pneumatic fluid power are covered by JB/T 7056-2008, a recommended standard of the Chinese machinery industry. It classifies fittings that carry compressed air as the medium and sets out product identification, basic technical requirements and test methods.

Its field of application is tube fittings in pneumatic systems whose maximum working pressure is not greater than 2.5 MPa. The document is filed under Chinese classification J20 and international classification 23.100.40, and the Ministry of Industry and Information Technology issued it in place of JB/T 7056-1993.

Standards it quotes include GB/T 2346, GB/T 17446, JB/T 7057, ISO 6150 and ISO 16030.

Found what you need?

Document preview — JB/T 7056-2008

National Standard of the People's Republic of China

ICS
23.100.40
Replacing
JB/T 7056-1993

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 7056-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.

It replaces the earlier edition JB/T 7056-1993.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

Tube fittings for pneumatic fluid power are covered by JB/T 7056-2008, a recommended standard of the Chinese machinery industry. It classifies fittings that carry compressed air as the medium and sets out product identification, basic technical requirements and test methods. Its field of application is tube fittings in pneumatic systems whose maximum working pressure is not greater than 2.5 MPa. The document is filed under Chinese classification J20 and international classification 23.100.40, and the Ministry of Industry and Information Technology issued it in place of JB/T 7056-1993. Standards it quotes include GB/T 2346, GB/T 17446, JB/T 7057, ISO 6150 and ISO 16030.

JB/T 7056-2008 falls under ICS 23.100.40, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 2346

GB/T 17446

JB/T 7057

ISO 6150

ISO 14743

ISO 16030

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 7056-1993 (earlier edition)

Standards on related subjects:

GB/T 7932-2017 — Pneumatic fluid power -- General rules and safety requirements for systems and their components

GB/T 3766-2015 — Hydraulic fluid power -- General rules and safety requirements for systems and their components

JB/T 8727-2004 — Hydraulic hose assemblies

JB/T 7737-2025 — Piston and vane air motors

JB/T 6948-2025 — Reduced air motor

JB/T 7041.1-2023 — Hydraulic Pumps - Part 1: Vane Pumps

6 Classification and status

International classification (ICS): 23.100.40

Chinese Standard Classification (CCS): J 20

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 7056

EditionTitleRevisionStatus
JB/T 7056-2008Pneumatic tube fittings - General technical requirementscurrent editionCurrent
JB/T 7056-1993Pneumatic tube fittings - General technical requirementsprevious editionSuperseded

This page sells the current edition, JB/T 7056-2008. Earlier editions are listed for reference only.

How to Download JB/T 7056-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7056-2008

$105.00