Valid

JB/T 7041-2006Hydraulic gear pumps (English PDF)

液压齿轮泵

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7041-2006 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 6, 2006

Implementation date

October 1, 2006

Scope

JB/T 7041-2006 is the English-translated version of 液压齿轮泵.

JB/T 7041-2006 is the Chinese standard "Hydraulic gear pumps". Its scope clause reads: This standard specifies the basic parameters, technical requirements, test methods, inspection rules, marking, packaging and other requirements of hydraulic gear pumps (hereinafter referred to as “gear pumps”).

This standard is applicable to the gear pumps with hydraulic oil or other liquids with equivalent performance as the operating medium. Note: The gear pumps involved in this standard are external gear pumps. Its clauses include terms and definitions.

Found what you need?

Document preview — JB/T 7041-2006

National Standard of the People's Republic of China

Replacing: JB/T 7042-1993

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Quantities, symbols and units
5 Basic parameters and marking
5.1 Basic parameters
5.2 Marking
6 Technical requirements
6.1 General requirements
6.2 Performance requirements
6.3 Assembly requirements
6.4 Appearance requirements
7 Test methods
7.1 Test apparatus
7.2 Test conditions
7.3 Test items and methods
7.4 Test data processing and result expression
8 Inspection method of assembly and appearance
9 Inspection rules
9.1 Inspection classification
9.2 Sampling
9.3 Judgment rules
10 Marking and packaging
Annex A (Informative) Test circuit and characteristic curve
A.1 Test circuit
A.2 Characteristic curves
A.3 Shock waveform
Figure A.1 Schematic diagram of open test circuit
Figure A.2 Schematic diagram of closed test circuit
Figure A.3 Curves of power, flow and efficiency with speed
Figure A.4 Curves of power, flow and efficiency with pressure
Figure A.5 Shock waveform
Table 1 Quantities, symbols and units
Table 2 Volume efficiency and total efficiency of gear pump
Table 3 Noise value of gear pump
Table 4 Internal cleanliness index of gear pump
Table 5 Allowable range of average display value of controlled parameters for gear pump
Table 6 Allowable error of measurement system
Table 7 End-of-manufacturing test items and methods of gear pump
Table 8 Type test items and methods of gear pump
Table 9 Inspection method of gear pump assembly and appearance

1 Scope

This standard specifies the basic parameters, technical requirements, test methods, inspection rules, marking, packaging and other requirements of hydraulic gear pumps (hereinafter referred to as “gear pumps”).

This standard is applicable to the gear pumps with hydraulic oil or other liquids with equivalent performance as the operating medium.

Note: The gear pumps involved in this standard are external gear pumps.

2 Normative references

The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.

GB/T 786.1 Fluid power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols (GB/T 786.1-1993, eqv ISO 1219-1:1991)

GB/T 2346 Fluid power systems and components - Nominal pressures (GB/T 2346-2003, ISO 2944:2000, MOD)

GB/T 2347 Hydraulic fluid power - Pumps and motors - Geometric displacements (GB/T 2347-1980, eqv ISO 3662:1976)

GB/T 2353 Dimension series and identification code for mounting flanges and shaft ends of hydraulic pumps and motors (GB/T 2353-2005, ISO 3019-2:2001, MOD)

GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (GB/T 2828.1-2003, ISO 2859-1:1999, IDT)

GB/T 2878 Fluid power systems and components - Ports - Dimensions and design (GB/T 2878-1993, neq ISO 6149:1980)

GB/T 7935-2005 Hydraulic fluid power - General requirements for hydraulic components

GB/T 7936 Hydraulic fluid power - positive displacement pumps and motors - Determination of derived capacity

GB/T 14039-2002 Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles (ISO 4406:1999, MOD)

GB/T 17446 Fluid power systems and components - Terminology (GB/T 17446-1998, idt ISO 5598:1985)

GB/T 17483 Test code for the determination of airborne noise level of hydraulic pumps (GB/T 17483-1998, eqv ISO 4412-1:1991)

JB/T 7858 Method to determine cleanliness and acceptance criterions for hydraulic components

3 Terms and definitions

For the purposes of this standard, the terms and definitions given in GB/T 17446 and the following apply.

3.1 rated pressure

maximum output pressure that can ensure the design life by continuous operation within the specified speed range

3.2 derived pressure

output pressure not exceeding 5% of rated pressure or 0.5MPa

3.3 maximum pressure

maximum output pressure allowed for short-term operation

3.4 nominal capacity

nominal geometric capacity of hydraulic pump

3.5 rated speed

maximum speed that can ensure the design life under the rated pressure and specified oil feeding conditions

3.6 minimum speed

minimum speed allowed to keep the output stable at the rated pressure

3.7 rated conditions

operating conditions under rated pressure and at rated speed […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

JB/T 7041.2-2020|JB/T 13476-2018|JB/T 6434-2010|JB/T 13325-2017|JB/T 12804-2016|JB/T 4115-2022

Editions of JB/T 7041

Edition	Title	Revision	Status
JB/T 7041-2006	Hydraulic gear pumps	current edition	Current
JB/T 7042-1993	Hydraulic gear pumps	previous edition	Superseded

This page sells the current edition, JB/T 7041-2006. Earlier editions are listed for reference only.

How to Download JB/T 7041-2006

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.