Valid

JB/T 6728.2-2008Internal combustion engines - Camshafts - Part 2: Cross wedge rolled blanks (English PDF)

内燃机 凸轮轴 第2部分:楔横轧毛坯

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 6728.2-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

June 4, 2008

Implementation date

November 1, 2008

Scope

JB/T 6728.2-2008 is the English-translated version of 内燃机 凸轮轴 第2部分:楔横轧毛坯.

JB/T 6728.2-2008 is a recommended Chinese machinery industry standard and is the part of the series on internal combustion engine camshafts that covers cross wedge rolled blanks.

It specifies the technical requirements for camshaft blanks, the test methods and inspection rules, and the provisions on signs, packaging, transport and storage.

It applies to camshaft blanks for reciprocating piston internal combustion engines with a cylinder diameter of 200 mm or less. Standards it quotes include GB/T 223.3, GB/T 226, GB/T 228, GB/T 231.1, GB/T 699, GB/T 3077, GB/T 10561-2005 and JB/T 6729.

It carries the Chinese classification J92 and the international classification 27.020, and was issued by the Ministry of Industry and Information Technology.

Found what you need?

Document preview — JB/T 6728.2-2008

National Standard of the People's Republic of China

ICS
27.020
Replacing
JB/T 8578-1997

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 6728.2-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.

It is one of 4 parts of the JB/T 6728 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard and is the part of the series on internal combustion engine camshafts that covers cross wedge rolled blanks. It specifies the technical requirements for camshaft blanks, the test methods and inspection rules, and the provisions on signs, packaging, transport and storage. It applies to camshaft blanks for reciprocating piston internal combustion engines with a cylinder diameter of 200 mm or less. Standards it quotes include GB/T 223.3, GB/T 226, GB/T 228, GB/T 231.1, GB/T 699, GB/T 3077, GB/T 10561-2005 and JB/T 6729. It carries the Chinese classification J92 and the international classification 27.020, and was issued by the Ministry of Industry and Information Technology.

JB/T 6728.2-2008 falls under ICS 27.020, in the field of energy and heat transfer engineering.

This catalogue holds 276 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 223.3

GB/T 223.4

GB/T 223.5

GB/T 223.72

GB/T 223.74

GB/T 226

GB/T 228

GB/T 231.1

GB/T 699

GB/T 2828.1

GB/T 3077

GB/T 6394

GB/T 10561-2005 — Steel - Determination of content of nonmetallic inclusions - Micrographic method using standards diagrams

GB/T 13320

JB/T 6729

4 Where this standard sits

It cites 15 standards, among them GB/T 10561-2005, listed in full above.

It is one part of the JB/T 6728 series, of which this catalogue holds 4 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 6728-1993 — Camshafts for internal combustion engines - Technical specifications

JB/T 6728.1-2008 — Part 1: Technical requirements

JB/T 6728.1-2018 — Part 1: Specification

Standards on related subjects:

GB/T 1148-2010 — Internal combustion engines - Aluminium pistons - Specifications

JB/T 6289-2005 — Internal combustion engines - Cast aluminium pistons - Metallographic examination

JB/T 6729-2025 — Internal combustion engine - Magnetic particle testing of crankshaft and camshaft

JB/T 6721-2025 — Internal combustion engine - link - Magnetic Particle Testing

7 Classification and status

International classification (ICS): 27.020

Chinese Standard Classification (CCS): J 92

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 6728.2

EditionTitleRevisionStatus
JB/T 6728.2-2008Internal combustion engines - Camshafts - Part 2: Cross wedge rolled blankscurrent editionCurrent
JB/T 8578-1997Internal combustion engines - Camshafts - Part 2: Cross wedge rolled blanksprevious editionSuperseded

This page sells the current edition, JB/T 6728.2-2008. Earlier editions are listed for reference only.

How to Download JB/T 6728.2-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 6728.2-2008

$105.00