JB/T 6640-2007Rolling bearings - Insert ball bearings with housings - Designation method (English PDF)
滚动轴承 带座外球面球轴承 代号方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6640-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 1, 2007
Implementation date
September 1, 2007
Scope
JB/T 6640-2007 is the English-translated version of 滚动轴承 带座外球面球轴承 代号方法.
JB/T 6640-2007 is the Chinese standard "Rolling bearings - Insert ball bearings with housings - Designation method". Its scope clause reads: This standard specifies the compilation methods for the codes of insert bearing units (hereinafter referred to as “bearing units”) and the bearing units with accessories. This standard is applicable to bearing units for general purpose.
Found what you need?
Document preview — JB/T 6640-2007
National Standard of the People's Republic of China
- ICS
- 21.100.20
- Replacing
- JB/T 6640-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative References
- 3 Code Composition of Bearing Units
- 4 Bearing Unit with Accessories
1 Scope
This standard specifies the compilation methods for the codes of insert bearing units (hereinafter referred to as “bearing units”) and the bearing units with accessories.
This standard is applicable to bearing units for general purpose.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 272-1993 Rolling Bearing-Identification Code
GB/T 7810-1995 Rolling Bearings-Insert Bearing Units-Boundary Dimensions
JB/T 2974-2004 Rolling Bearings-Identification Code-Supplemental Regulations
JB/T 5303-2002 Insert Bearing Units-Supplementary Structure-Boundary Dimensions
JB/T 5304-2007 Rolling Bearings-Insert Bearings-Radial Internal Clearance […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 272-1993Rolling bearings - Identification code
- GB/T 7810-1995Rolling bearings—Insert bearing units—Boundary dimensions
- JB/T 2974-2004Supplementary rules for rolling bearing identification codes
- JB/T 5303-2002Rolling bearings - Supplementary designs of insert bearing units - Boundary dimensions
- JB/T 5304-2007Rolling bearings - Insert bearings - Radial internal clearance
Similar standards
Editions of JB/T 6640
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6640-2007 | Rolling bearings - Insert ball bearings with housings - Designation method | current edition | Current |
| JB/T 6640-1993 | Rolling bearings - Insert ball bearings with housings - Designation method | previous edition | Superseded |
This page sells the current edition, JB/T 6640-2007. Earlier editions are listed for reference only.
How to Download JB/T 6640-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 272-1993 — Rolling bearing. Identification code
GB/T 7810-1995 — Rolling bearings. Insert bearing units. Boundary dimensions
JB/T 2974-2004 — Supplementary rules for rolling bearing identification codes
JB/T 6640-2007
$329.00