Valid

JB/T 8876-2010Rolling bearings - Cast housings for insert bearings - Specifications (English PDF)

滚动轴承 外球面球轴承铸造座 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8876-2010 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 11, 2010

Implementation date

July 1, 2010

Scope

JB/T 8876-2010 is the English-translated version of 滚动轴承 外球面球轴承铸造座 技术条件.

JB/T 8876-2010 is the Chinese standard "Rolling bearings - Cast housings for insert bearings - Specifications". Its scope clause reads: This standard specifies the technical requirements, measurement methods, inspection rules, marking and packaging of cast housings for insert bearings.

This standard is applicable to the cast housings whose boundary dimensions meeting the requirements of GB/T 7809 and JB/T 5302.

Found what you need?

Document preview — JB/T 8876-2010

National Standard of the People's Republic of China

Replacing
JB/T 8876-2000

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Symbols
  • 4.1 Plummer Block Housing
  • 4.2 Flanged Housing
  • 4.3 Take-up Housing
  • 4.4 Annular Housing
  • 5 Technical Requirements
  • 5.1 Materials
  • 5.2 Tolerance
  • 5.3 Surface Roughness
  • 5.4 Requirements for Casting
  • 5.5 Others
  • 6 Measurement Methods
  • 7 Inspection Rules
  • 8 Marking
  • 9 Packaging, Storage and Transportation
  • Appendix A (Normative) Measurement Methods

1 Scope

This standard specifies the technical requirements, measurement methods, inspection rules, marking and packaging of cast housings for insert bearings.

This standard is applicable to the cast housings whose boundary dimensions meeting the requirements of GB/T 7809 and JB/T 5302.

2 Normative References

The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.

GB/T 275-1993 Shaft and Housing Fits for Rolling Bearings

GB/T 1184-1996 Geometrical Tolerancing-Geometrical Tolerance for Features without Individual Tolerance Indications (eqv ISO 2768-2: 1989)

GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributes-Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (ISO 2859-1: 1999, IDT)

GB/T 4199-2003 Rolling bearings-Tolerances-Definitions (IS0 1132-1: 2000, Rolling bearings-Tolerances-Part1: Terms and definitions, MOD)

GB/T 6930-2002 Rolling Bearings-Vocabulary (ISO 5593: 1997, IDT)

GB/T 7809-1995 Rolling Bearings- Housings for Insert Bearing-Boundary Dimensions(eqv ISO 3228: 1993)

GB/T 8597-2003 Rolling Bearings-Rust Proof Packaging

GB/T 9439-1988 Grey Iron Castings

JB/T 5302-2002 Housings for Insert Bearings-Supplementary Structure-Boundary Dimensions […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 8876

EditionTitleRevisionStatus
JB/T 8876-2010Rolling bearings - Cast housings for insert bearings - Specificationscurrent editionCurrent
JB/T 8876-2000Rolling bearings - Cast housings for insert bearings - Specificationsprevious editionSuperseded

This page sells the current edition, JB/T 8876-2010. Earlier editions are listed for reference only.

How to Download JB/T 8876-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8876-2010

$494.00