JB/T 6406-2006Electro-hydraulic drum brakes (English PDF)
电力液压鼓式制动器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6406-2006 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 16, 2006
Implementation date
February 1, 2007
Scope
JB/T 6406-2006 is the English-translated version of 电力液压鼓式制动器.
JB/T 6406-2006 is the Chinese standard "Electro-hydraulic drum brakes". Its scope clause reads: This standard specifies the terms and definitions, types, basic parameters and sizes, technical requirements, test methods and inspection rules of electro-hydraulic drum brakes (hereinafter referred to as brake).
This standard is applicable to the drum brake using electro-hydraulic thrusters (hereinafter referred to as thruster) as the driving device. Its clauses include terms and definitions.
Found what you need?
Document preview — JB/T 6406-2006
National Standard of the People's Republic of China
- Replacing
- JB/T 6406.1-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Type, Basic Parameter and Connection Dimension
- 4.1 Type
- 4.2 Basic Parameter and Connection Dimension
- 5 Technical Requirements
- 5.1 Working and Environmental Conditions
- 5.2 Structural and Functional Requirements
- 5.3 Performance Requirements
- 5.4 Important Spare Parts
- 5.5 Surface Coating and Anti-Corrosion Requirements
- 6 Test Methods
- 6.1 Visual Inspection
- 6.2 Structure and Function Test
- 6.3 Performance Test
- 6.4 Surface Coating and Anti-Corrosion Performance Inspection
- 6.5 Important Spare Parts Test
- 7 Inspection Rules
- 7.1 Delivery Inspection
- 7.2 Type Test
- 8 Mark, Package, Transportation and Storage
- 8.1 Mark
- 8.2 Package
- 8.3 Transportation and Storage
- 9 Quality Assurance Date
1 Scope
This standard specifies the terms and definitions, types, basic parameters and sizes, technical requirements, test methods and inspection rules of electro-hydraulic drum brakes (hereinafter referred to as brake).
This standard is applicable to the drum brake using electro-hydraulic thrusters (hereinafter referred to as thruster) as the driving device.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 191 Packaging - Pictorial marking for handling of goods (GB/T 191-2000, eqv ISO 780:1997)
GB/T 1239.2 Cold coiled helical compressions springs-Technical specifications
GB/T 1239.4 Hot coiled helical springs-Technical specifications
GB/T 1239.6 Design of cylindrical helical springs
GB/T 6461 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests (GB/T 6461-2002, ISO 10289:1999, IDT)
GB/T 8923 Rust grades and preparation grades of steel surfaces before application of paints and related products (GB/T 8923-1988.eqv ISO 8501-1:1988)
GB/T 9286 Paints and varnishes-Cross cut test for films (GB/T 9286-1998, eqv ISO 2409:1992)
GB/T 10125 Corrosion tests in artificial atmospheres-Salt spray tests (GB/T 10125-1997, eqv ISO 9227:1990)
GB/T 13306 Plates
GB/T 13384 General specification for packagings of mechanical and electrical products
GB/T 13452.2 Paints and varnishes - Determination of film thickness (GB/T 13452.2-1992, idt ISO 2808:1974)
GB/T 15957 Corrosivity classification of atmospheric environment
JB/T 5000.12 The heavy mechanical general techniques and Standards Coating
JB/T 6540 Brake-Terms
JB/T 7021 Drum brake connecting dimensions
JB/T 10603 Electro-hydraulic thrusters
3 Terms and Definitions
For the purpose of this standard, the terms and definitions established in JB/T 6540 and the following ones apply.
3.1 Brake releasing
Brake shoe braking visard releases contact with braking couple braking surface and eliminates braking moment.
3.2 Brake setting
Brake shoe braking visard contacts with braking couple braking surface and sets braking moment.
3.3 Applying force by the brake-spring
Spring force that generates braking force or braking moment
3.4 Rated applying force by the brake-spring
Spring force that generates rated braking force or rated braking moment
3.5 Shoes clearance
It refers to the average distance from the shoe braking visard to the braking couple braking surface under the released state of brake.
3.6 Shoes aligning
Through some devices or some measures, where the brake is closed, shoe braking visard can normally contact with the braking couple braking surface; under the normal release state, any position of braking visard cannot contact with the braking couple braking surface.
3.7 Working stroke of the thruster
It refers to the distance that thruster push rod moves from the working initial position to the final position when the brake is working.
3.8 Work for once braking
It refers to the friction braking work made by or the braking energy generated by the once dynamic braking of brake.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 44970-2024Grain and oil machinery - Air cushion belt conveyor
- DL/T 1965-2019Rotary dumper system operation and maintenance guidelines
- JT/T 1298-2019Port pedestal crane
- JB/T 13479-2018Industrial brakes - Brake linings
- NB/T 35051-2015Code for manufacture, erection and acceptance of gate hoists in hydropower projects
- GB 6067.5-2014Safety rules for lifting appliances - Part 5: Bridge and gantry cranes
Similar standards
Editions of JB/T 6406
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6406-2006 | Electro-hydraulic drum brakes | current edition | Current |
| JB/T 6406.1-1992 | Electro-hydraulic drum brakes | previous edition | Superseded |
This page sells the current edition, JB/T 6406-2006. Earlier editions are listed for reference only.
How to Download JB/T 6406-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 6406.1-1992 — Electro-hydraulic shoe brakes - Types, basic parameters and dimensions
JB/T 6406.2-1992 — Electro-hydraulic shoe brakes - Technical specifications
JB/T 6406.3-1992 — Electro-hydraulic shoe brakes - Thrusters
JB/T 6406-2006
$85.00