JB/T 6392-2008Crane wheels (English PDF)
起重机车轮
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6392-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 6392-2008 is the English-translated version of 起重机车轮.
JB/T 6392-2008 is the Chinese standard "Crane wheels". Its scope clause reads: This standard specifies the basic structure type, dimension, tread shape, fits between the wheel and rail, technical requirements, inspection rules, marking and packaging requirements of cylindrical rail wheels for cranes (hereinafter referred to as "wheels").
This standard is applicable to cylindrical rail wheels for bridge cranes and gantry cranes, and it may also be used as a reference for rail wheels for other cranes. Its clauses include type and dimension.
Found what you need?
Document preview — JB/T 6392-2008
National Standard of the People's Republic of China
- ICS
- 53.020.30
- Replacing
- JB/T 6392.1-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Type and dimension
- 3.1 Wheel code
- 3.2 Model denotation methods for wheels
- 4 Fits between the tread shape and dimension and the steel rail
- 5 Requirements
- 5.1 Mechanical properties of materials
- 5.2 Heat treatment
- 5.3 Accuracy
- 5.4 Surface quality of finished wheels
- 5.5 Inner quality of finished wheels
- 5.6 Bearing capacity of wheels
- 6 Test methods
- 6.1 Test methods for inner quality of wheels
- 7 Inspection rules
- 7.1 End-of-manufacturing inspection
- 7.2 Type test
- 8 Marking and packaging
1 Scope
This standard specifies the basic structure type, dimension, tread shape, fits between the wheel and rail, technical requirements, inspection rules, marking and packaging requirements of cylindrical rail wheels for cranes (hereinafter referred to as "wheels").
This standard is applicable to cylindrical rail wheels for bridge cranes and gantry cranes, and it may also be used as a reference for rail wheels for other cranes.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 699 Quality carbon structure steels
GB/T 1031-1995 Surface roughness — Parameters and their values
GB/T 1184-1996 Geometrical tolerancing — Geometrical tolerances for features without individual tolerance indications (eqv ISO 2768-2:1989)
GB/T 1801-1999 Limits and fits — Selection of tolerance zones and fits (eqv ISO 1829:1975)
GB/T 2585-2007 Hot-rolled steel rails for railway (EN 13674-1:2003, NEQ)
GB/T 11264 Light rails
GB/T 11352 Carbon steel castings for general engineering purpose (GB/T 11352-1989, ISO 3755:1975)
GB/T 13384 General specifications for packing of mechanical and electrical product
JB/T 5000.14-2007 Heavy mechanical general techniques and standards — Part 14: Non-destructive inspection of cast steel
JB/T 5000.15-2007 Heavy mechanical general techniques and standards — Part 15: Non-destructive inspection of forged steel
YB/T 5055-1993 Crane rails
3 Type and dimension
3.1 Wheel code
Wheels may be classified into the following three types by their flange shape:
a) Double-flange wheel: code: SL; dimension: see Figure 1a) and Table 1;
b) Double-flange wheel: code: DL; dimension: see Figure 1b) and Table 1;
c) Flangeless wheel: code: WL; dimension: see Figure 1c) and Table 1;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 699Quality carbon structure steels
- GB/T 1031-1995Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1801-1999Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits
- GB/T 2585-2007Hot-rolled steel rails for railway
- GB/T 11264Hot-rolled light rails
Cited by
- GB/T 39980-2021Mechanical parking system—Design rules
- DL/T 1964-2019Ring type distribution machine
- JT/T 1298-2019Port pedestal crane
- CJ/T 522-2018Traveling-bridge suction degritter for grit chamber in sewage treatment plant
- JB/T 12214-2015Polar cranes for nuclear power plants
- NB/T 35051-2015Code for manufacture, erection and acceptance of gate hoists in hydropower projects
Editions of JB/T 6392
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6392-2008 | Crane wheels | current edition | Current |
| JB/T 6392.1-1992 | Crane wheels | previous edition | Superseded |
This page sells the current edition, JB/T 6392-2008. Earlier editions are listed for reference only.
How to Download JB/T 6392-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 6392-2008
$105.00