JB/T 6287-2008Grain combine harvesters - Reliability evaluation test methods (English PDF)
谷物联合收割机 可靠性评定试验方法
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6287-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 16, 2008
Implementation date
December 1, 2008
Scope
JB/T 6287-2008 is the English-translated version of 谷物联合收割机 可靠性评定试验方法.
JB/T 6287-2008 is a recommended Chinese machinery industry standard setting out the reliability determination test methods for grain combine harvesters.
It fixes the basic requirements for the test, the sampling rules, the test duration, the principles for deciding and counting failures, the classification of failures, the handling of the data and the reliability indices, and it prescribes the test report.
It applies to the reliability assessment of combine harvesters in mass production, and trial prototypes may also be tested with reference to it. The document carries the Chinese classification B91. It quotes GB/T 3187-1994.
Found what you need?
Document preview — JB/T 6287-2008
National Standard of the People's Republic of China
- Replacing
- JB/T 6287-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 6287-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 16 June 2008 and has been in force since 1 December 2008.
It replaces the earlier edition JB/T 6287-1992.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard setting out the reliability determination test methods for grain combine harvesters. It fixes the basic requirements for the test, the sampling rules, the test duration, the principles for deciding and counting failures, the classification of failures, the handling of the data and the reliability indices, and it prescribes the test report. It applies to the reliability assessment of combine harvesters in mass production, and trial prototypes may also be tested with reference to it. The document carries the Chinese classification B91. It quotes GB/T 3187-1994.
JB/T 6287-2008 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 3187-1994 — Reliability and maintainability terms
4 Where this standard sits
It cites one other standard, GB/T 3187-1994, listed in full above.
2 other standards in this catalogue cite it, among them GB/T 21962-2020, JB/T 12825-2016.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 21 pages
6 Related standards
Other editions:
JB/T 6287-1992 (earlier edition)
Standards on related subjects:
LY/T 3022-2018 — Garden machinery - Hand-held chain-saws with lithium-ion battery as power source
GB/T 2818-2014 — Submersible motors for deep wells
JB/T 10600-2006 — Vertical self-priming pumps
JB/T 6284-2026 — Adjustable cleaner
JB/T 6281-2025 — Tea picking machine
JB/T 6279-2023 — Disc harrow
7 Classification and status
Chinese Standard Classification (CCS): B 91
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 6287
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6287-2008 | Grain combine harvesters - Reliability evaluation test methods | current edition | Current |
| JB/T 6287-1992 | Grain combine harvesters - Reliability evaluation test methods | previous edition | Superseded |
This page sells the current edition, JB/T 6287-2008. Earlier editions are listed for reference only.
How to Download JB/T 6287-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3187-1994 — Reliability and maintainability terms
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 6287-2008
$375.00