JB/T 6267-2013Vertical metroscope (English PDF)
立式测长仪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6267-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 6267-2013 is the English-translated version of 立式测长仪.
JB/T 6267-2013 is a recommended machinery industry standard of China for the vertical metroscope, an instrument for measuring length. It sets the basic parameters of the instrument, the requirements it has to meet, the test methods and the inspection rules, and adds marking, packaging, transport and storage.
The instruments covered are those built on a base, with a vertical measuring axis, and working by contact with the workpiece. It quotes GB/T 2828.1, GB/T 2829, GB/T 2831, GB/T 13384, GB/T 25480, HB/T 7401 and JB/T 9342-1999.
It takes the place of JB/T 6267-1992. The standard carries Chinese classification N34 and international classification 37.020, and the Ministry of Industry and Information Technology issued it.
Found what you need?
Document preview — JB/T 6267-2013
National Standard of the People's Republic of China
- ICS
- 37.020
- Replacing
- JB/T 6267-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 6267-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 6267-1992.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended machinery industry standard of China for the vertical metroscope, an instrument for measuring length. It sets the basic parameters of the instrument, the requirements it has to meet, the test methods and the inspection rules, and adds marking, packaging, transport and storage. The instruments covered are those built on a base, with a vertical measuring axis, and working by contact with the workpiece. It quotes GB/T 2828.1, GB/T 2829, GB/T 2831, GB/T 13384, GB/T 25480, HB/T 7401 and JB/T 9342-1999. It takes the place of JB/T 6267-1992. The standard carries Chinese classification N34 and international classification 37.020, and the Ministry of Industry and Information Technology issued it.
JB/T 6267-2013 falls under ICS 37.020, in the field of image technology.
This catalogue holds 169 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2828.1
GB/T 2829
GB/T 2831
GB/T 13384
GB/T 25480
HB/T 7401
JB/T 9342-1999 — Measuring caps for optical metrological instruments
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 6267-1992 (earlier edition)
Standards on related subjects:
GB/T 32387-2015 — Color assessment booth
GB/T 17341-1998 — [GB/T 17341-1998] Optics and optical instruments. Focimeters
JB/T 7403-1994 — Illuminance meters
JB/T 7401-2024 — Plane optical flat
JB/T 8232-2024 — Autocollimetors
JB/T 2369-2024 — Reading microscope
6 Classification and status
International classification (ICS): 37.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829Sampling procedures and tables for periodic inspection by attributes
- GB/T 2831Surface form deviation of optical elements
- GB/T 13384General specifications for packing of mechanical and electrical product
- GB/T 25480Basic environmental conditions and testing methods for transportation and storage of instruments
- JB/T 9342-1999Gauge hat for optical metrical instrument
HB/T 7401
Editions of JB/T 6267
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6267-2013 | Vertical metroscope | current edition | Current |
| JB/T 6267-1992 | Vertical metroscope | previous edition | Superseded |
This page sells the current edition, JB/T 6267-2013. Earlier editions are listed for reference only.
How to Download JB/T 6267-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 25480-2010 — Basic environmental conditions and testing methods for transportation and storage of instruments
JB/T 6267-2013
$299.00