Valid

JB/T 6239.4-2007General test methods for industrial automation instruments - Part 4: Short-term power supply interruption immunity test (English PDF)

工业自动化仪表通用试验方法 第4部分:电源短时中断抗扰度试验

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 6239.4-2007 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 8, 2007

Implementation date

March 1, 2008

Scope

JB/T 6239.4-2007 is the English-translated version of 工业自动化仪表通用试验方法 第4部分:电源短时中断抗扰度试验.

JB/T 6239.4-2007 is the Chinese machinery industry standard covering general test methods for industrial automation instruments, Part 4: Short-term power supply interruption immunity test.

It was issued on 8 October 2007 and has been in force since 1 March 2008, replacing JB/T 6239.4-1992. The document is under the responsibility of the Ministry of Industry and Information Technology.

This page is published from the official record of the 2007 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 6239.4-2007

National Standard of the People's Republic of China

Replacing
JB/T 6239.4-1992

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 6239.4-2007 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 8 October 2007 and has been in force since 1 March 2008.

It replaces the earlier edition JB/T 6239.4-1992.

It is one of 9 parts of the JB/T 6239 series.

2 Scope Preview

JB/T 6239.4-2007 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

JB/T 6239.1-1992 — Common test methods for industrial automation instruments. Common mode, serial mode interference

JB/T 6239.1-2007 — Part 1: Common mode and series mode disturbance immunity tests

JB/T 6239.2-1992 — Common test methods for industrial automation, instrumentation power supply voltage frequency variations.

JB/T 6239.2-2007 — Part 2: Supply voltage and frequency variation immunity test

JB/T 6239.3-1992 — Common test methods for industrial automation, instrumentation power supply voltage, low drop impact

JB/T 6239.3-2007 — Part 3: Supply voltage dip immunity test

JB/T 6239.5-1992 — Common test methods for industrial automation, instrumentation power supply transient overvoltage impact

JB/T 6239.5-2007 — Part 5: Power supply fast transient single pulse immunity test

Other editions:

JB/T 6239.4-1992 (earlier edition)

Standards on related subjects:

GB/T 18268.1-2025 — Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements

GB/T 4830-2015 — Pressure range and quality of air supply for the industrial process measurement and control instruments

CJ/T 224-2012 — Electronic remote-reading water meter

JB/T 6214-2014 — Guidelines for reliability compliance tests and determination tests (exponential distribution) of instruments

JB/T 6182-2014 — Guidelines for design review of instrumentation

JB/T 9236-2014 — Principles of type designation for industrial automation instruments

5 Classification and status

Chinese Standard Classification (CCS): N 10

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 6239.4

EditionTitleRevisionStatus
JB/T 6239.4-2007General test methods for industrial automation instruments - Part 4: Short-term power supply interruption immunity testcurrent editionCurrent
JB/T 6239.4-1992General test methods for industrial automation instruments - Part 4: Short-term power supply interruption immunity testprevious editionSuperseded

This page sells the current edition, JB/T 6239.4-2007. Earlier editions are listed for reference only.

How to Download JB/T 6239.4-2007

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 6239.4-2007

$209.00