JB/T 6012-1992Intake and exhaust valves for internal combustion engines - Technical specifications (English PDF)
内燃机进、排气门 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6012-1992 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 1, 1992
Implementation date
January 1, 1992
Scope
JB/T 6012-1992 is the English-translated version of 内燃机进、排气门 技术条件.
JB/T 6012-1992 is the Chinese machinery industry standard covering intake and exhaust valves for internal combustion engines - Technical specifications. It was issued on 1 January 1992 and has been in force since 1 January 1992, replacing GB 2784-1981.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1992 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 6012-1992
National Standard of the People's Republic of China
- Replacing
- GB 2784-1981
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 6012-1992 is issued by Ministry of Industry and Information Technology of the People's Republic of China.
It is one of 6 parts of the JB/T 6012 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 6012-1992 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 6012.2-2008 — Internal combustion engines - Intake and exhaust valves - Part 2: Metallographic examination
JB/T 6012.2-2025 — Internal combustion engine - Intake and exhaust valves - Part 2: Metallographic examination
JB/T 6012.3-2008 — Internal combustion engines - Intake and exhaust valves - Part 3: Magnetic particle testing
JB/T 6012.4-2008 — Internal combustion engines - Intake and exhaust valves - Part 4: Friction welding valves - Ultrasonic testing
JB/T 6012.5-2014 — Internal combustion engines - Intake and exhaust valves - Part 5: Fluorescent penetrant testing
Other editions:
JB/T 6012-2005 (later edition)
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- JB/T 6012.3-2008Internal combustion engines - Intake and exhaust valves - Part 3: Magnetic particle testing
- JB/T 6012.4-2008Internal combustion engines - Intake and exhaust valves - Part 4: Friction welding valves - Ultrasonic testing
- JB/T 6720-1993Intake and exhaust valves for internal combustion engines - Metallographic examination
Similar standards
Editions of JB/T 6012
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6012-1992 | Intake and exhaust valves for internal combustion engines - Technical specifications | current edition | Current |
| GB 2784-1981 | Intake and exhaust valves for internal combustion engines - Technical specifications | previous edition | Superseded |
This page sells the current edition, JB/T 6012-1992. Earlier editions are listed for reference only.
How to Download JB/T 6012-1992
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 6012.2-2025 — Internal combustion engine - Intake and exhaust valves - Part 2: Metallographic examination
JB/T 6012.2-2008 — Internal combustion engines - Intake and exhaust valves - Part 2: Metallographic examination
JB/T 6012.3-2008 — Internal combustion engines - Intake and exhaust valves - Part 3: Magnetic particle testing
JB/T 6012-1992
$329.00