Valid

JB/T 5785-2013Specification of moulds for glass (English PDF)

玻璃模技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 5785-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 5785-2013 is the English-translated version of 玻璃模技术条件.

JB/T 5785-2013 is a recommended Chinese machinery industry standard on moulds for glass. It classifies glass moulds and lays down the requirements for them, the test methods, the acceptance provisions and the rules for marking, packaging, transport and storage.

The moulds within its field of use are those employed to make glass containers and glassware by blowing, by extrusion blow moulding and by the press-and-blow method.

The standard sits under Chinese classification J46 and international classification 25.120.30, and was issued by the Ministry of Industry and Information Technology.

Its list of quoted standards is made up of a long run of parts of the GB/T 223 series. It replaces the earlier edition, JB/T 5785-1991.

Found what you need?

Document preview — JB/T 5785-2013

National Standard of the People's Republic of China

ICS
25.120.30
Replacing
JB/T 5785-1991

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 5785-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.

It replaces the earlier edition JB/T 5785-1991.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard on moulds for glass. It classifies glass moulds and lays down the requirements for them, the test methods, the acceptance provisions and the rules for marking, packaging, transport and storage. The moulds within its field of use are those employed to make glass containers and glassware by blowing, by extrusion blow moulding and by the press-and-blow method. The standard sits under Chinese classification J46 and international classification 25.120.30, and was issued by the Ministry of Industry and Information Technology. Its list of quoted standards is made up of a long run of parts of the GB/T 223 series. It replaces the earlier edition, JB/T 5785-1991.

JB/T 5785-2013 falls under ICS 25.120.30, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 223.8

GB/T 223.77

GB/T 223.78

GB/T 223.76

GB/T 223.74

GB/T 223.71

GB/T 223.68

GB/T 223.66

GB/T 223.63

GB/T 223.62

GB/T 223.6

GB/T 223.61

GB/T 223.60

GB/T 223.58

GB/T 223.57

GB/T 223.54

GB/T 223.53

GB/T 223.52

GB/T 223.51

GB/T 223.5

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 5785-1991 (earlier edition)

Standards on related subjects:

GB/T 45677-2025 — Forming moulds of composite material for upper cover of new energy vehicle battery pack

GB/T 6110-2021 — Drawing dies—Carbide alloy drawing dies—Structural types and dimensions

JB/T 6057-1992 — Steels for moulding parts of plastic moulds and their heat treatment - Technical specifications

JB/T 7644-2025 — Die - Single punch template

JB/T 7643-2025 — Die - template

JB/T 5825-2025 — Die - Round punch

6 Classification and status

International classification (ICS): 25.120.30

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Editions of JB/T 5785

EditionTitleRevisionStatus
JB/T 5785-2013Specification of moulds for glasscurrent editionCurrent
JB/T 5785-1991Specification of moulds for glassprevious editionSuperseded

This page sells the current edition, JB/T 5785-2013. Earlier editions are listed for reference only.

How to Download JB/T 5785-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 5785-2013

$249.00