JB/T 5736-2018Blades grooving cutter for woodworking (English PDF)
木工双齿榫槽铣刀
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5736-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 9, 2018
Implementation date
October 1, 2018
Scope
JB/T 5736-2018 is the English-translated version of 木工双齿榫槽铣刀.
JB/T 5736-2018 is the Chinese machinery industry standard for the double-tooth grooving cutters used in woodworking. It fixes the type of the cutter and its basic dimensions, states the technical requirements, gives the test methods, and sets the basic requirements for marking and packaging.
The cutters concerned are the two-blade milling cutters that cut the grooves and tenon slots of woodwork. It quotes GB/T 699, GB/T 4897, GB/T 9239.1-2006, GB/T 9943 and GB/T 18376.1.
It supersedes JB/T 5736-1991. Its Chinese classification is J65 and its international classification 79.120.10.
Found what you need?
Document preview — JB/T 5736-2018
National Standard of the People's Republic of China
- ICS
- 79.120.10
- Replacing
- JB 5736-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 5736-2018 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 February 2018 and has been in force since 1 October 2018.
It replaces the earlier edition JB/T 5736-1991.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the Chinese machinery industry standard for the double-tooth grooving cutters used in woodworking. It fixes the type of the cutter and its basic dimensions, states the technical requirements, gives the test methods, and sets the basic requirements for marking and packaging. The cutters concerned are the two-blade milling cutters that cut the grooves and tenon slots of woodwork. It quotes GB/T 699, GB/T 4897, GB/T 9239.1-2006, GB/T 9943 and GB/T 18376.1. It supersedes JB/T 5736-1991. Its Chinese classification is J65 and its international classification 79.120.10.
JB/T 5736-2018 falls under ICS 79.120.10, in the field of wood technology.
This catalogue holds 60 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 699
GB/T 4897
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GB/T 9943
GB/T 18376.1
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 5736-1991 (earlier edition)
Standards on related subjects:
JB/T 13910.1-2020 — Stacking machines - Part 1: Types and basic parameters
JB/T 1647.2-2012 — Straight-side mechanical power presses - Part 2: Technical requirements
GB/T 8118-2010 — The general specification for arc welding machines
JB/T 5734-2025 — Four-sided woodworking milling machine
JB/T 5735-2018 — Grooving cutter for woodworking
JB/T 5728.1-2014 — Multi-blade ripping circular saws for woodworking - Part 1: Parameters
6 Classification and status
International classification (ICS): 79.120.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 5736
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5736-2018 | Blades grooving cutter for woodworking | current edition | Current |
| JB 5736-1991 | Blades grooving cutter for woodworking | previous edition | Superseded |
This page sells the current edition, JB/T 5736-2018. Earlier editions are listed for reference only.
How to Download JB/T 5736-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 18376.1-2001 — Carbide grade - Part 1: cutting tools with carbide grade
GB/T 18376.1-2008 — Grades of cemented carbide - Part 1:Grades of cemented carbide for cutting tools
GB/T 4897.1-2003 — Particleboard - Part 1: General requirements for all board types
JB/T 5736-2018
$105.00