JB/T 5548.2-2015Electrical vibrator - Part 2: Technical requirements (English PDF)
电动激振器 第2部分：技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5548.2-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 5548.2-2015 is the English-translated version of 电动激振器 第2部分：技术条件.
JB/T 5548.2-2015 is the Chinese machinery industry standard covering electrical vibrator, Part 2: Technical requirements. It was issued on 10 October 2015 and has been in force since 1 March 2016, replacing JB/T 5548.2-2006.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2015 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 5548.2-2015
National Standard of the People's Republic of China
- Replacing
- JB/T 5548.2-2006
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 5548.2-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.
It replaces the earlier edition JB/T 5548.2-2006.
It is one of 5 parts of the JB/T 5548 series.
2 Scope Preview
JB/T 5548.2-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 5548-1991 — Electric shaker. General technical requirements
JB/T 5548.1-2006 — Electric vibration exciters - Part 1: Types and basic parameters
JB/T 5548.1-2015 — Electrical vibrator - Part 1: Types and basic parameters
JB/T 5548.1-2024 — Electric Vibrator - Part 1: Type and basic parameters
Other editions:
JB/T 5548.2-2025 (later edition)
JB/T 5548.2-2006 (earlier edition)
Standards on related subjects:
GB/T 37365-2019 — Die casting unit—Performance testing method
GB/T 21269-2018 — Cold chamber die casting machines
JB/T 12243-2015 — Die-casting unit - Safety signs
JB/T 5552-2022 — Shell moulding machines - Technical specifications
JB/T 5551-2022 — Three-pass rotary drum sand dryers - Technical specifications
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- JB/T 13423-2018Continuous pass-through crawler shot blasting machines - Technical requirements
- JB/T 6574-2017Rotary vibratory finishing machines
- JB/T 6575-2017Shakeout machines
- JB/T 9980.2-2015Vibrating table - Part 2: Technical requirements
- JB/T 8784-2014Drum-type shakeout machines - Technical requirements
- JB/T 11542-2013V-process vibrating screens - Technical requirements
Similar standards
Editions of JB/T 5548.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5548.2-2015 | Electrical vibrator - Part 2: Technical requirements | current edition | Current |
| JB/T 5548.2-2006 | Electrical vibrator - Part 2: Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 5548.2-2015. Earlier editions are listed for reference only.
How to Download JB/T 5548.2-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 5548.1-2006 — Electric vibration exciters - Part 1: Types and basic parameters
JB/T 5548.1-2015 — Electrical vibrator - Part 1: Types and basic parameters
JB/T 5548.1-2024 — Electric Vibrator - Part 1: Type and basic parameters
Secure payment via Stripe
Payments accepted
JB/T 5548.2-2015
$289.00