JB/T 6574-2017Rotary vibratory finishing machines (English PDF)
旋振清理光饰机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6574-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 12, 2017
Implementation date
January 1, 2018
Scope
JB/T 6574-2017 is the English-translated version of 旋振清理光饰机.
JB/T 6574-2017 is the recommended Chinese machinery industry standard for rotary vibratory finishing machines. It sets out the types and basic parameters, the technical requirements, the test methods, the inspection rules, and the marking, packing, transport and warranty period for this equipment.
The machines concerned clean and polish the surface of workpieces by vibration, the grinding media rubbing against the parts as they move; the standard refers to them as finishing machines.
Among the standards it quotes are GB/T 1804-2000, GB/T 3098.1-2010, GB 5226.1, GB/T 23934-2015 and GB/T 31552. It supersedes JB/T 6574-2008, and carries the classifications J61 and 25.120.30.
Found what you need?
Document preview — JB/T 6574-2017
National Standard of the People's Republic of China
- ICS
- 25.120.30
- Replacing
- JB/T 6574-2008
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 6574-2017 was issued by MIIT on 12 April 2017.
It replaces the earlier edition JB/T 6574-1993.
2 Scope
JB/T 6574-2017 is the recommended Chinese machinery industry standard for rotary vibratory finishing machines. It sets out the types and basic parameters, the technical requirements, the test methods, the inspection rules, and the marking, packing, transport and warranty period for this equipment. The machines concerned clean and polish the surface of workpieces by vibration, the grinding media rubbing against the parts as they move; the standard refers to them as finishing machines. Among the standards it quotes are GB/T 1804-2000, GB/T 3098.1-2010, GB 5226.1, GB/T 23934-2015 and GB/T 31552. It supersedes JB/T 6574-2008, and carries the classifications J61 and 25.120.30.
3 Normative references
JB/T 6574-2017 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1239.2-2009 — Cold coiled helical springs technical specifications - Part 2: Compressions spring
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3098.1-2010 — Mechanical properties of fasteners - Bolts, screws and studs
GB/T 3098.2-2015 — Mechanical properties of fasteners -- Nuts
GB 5226.1
GB/T 9969
GB/T 13306
GB 20905
GB/T 23570
GB/T 23934-2015 — Hot formed helical compression springs -- Technical Requirement
GB/T 25371
GB/T 25711-2010
GB/T 31552
JB/T 5548.1
JB/T 5548.2
YB/T 170.4
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 6574-1993 (earlier edition)
6 Classification and status
International classification (ICS): 25.120.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1239.2-2009Cold coiled helical springs technical specifications - Part 2: Compressions spring
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3098.1-2010Mechanical properties of fasteners - Bolts, screws and studs
- GB/T 3098.2-2015Mechanical properties of fasteners - Part 2: Nuts
- GB/T 9969General principles for preparation of instructions for use of industrial products
- GB/T 13306Plates
GB 5226.1 · YB/T 170.4
Similar standards
Editions of JB/T 6574
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6574-2017 | Rotary vibratory finishing machines | current edition | Current |
| JB/T 6574-2008 | Rotary vibratory finishing machines | previous edition | Superseded |
This page sells the current edition, JB/T 6574-2017. Earlier editions are listed for reference only.
How to Download JB/T 6574-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 20905-2025 — Foundry machinery - Safety requirements
GB/T 1239.2-2009 — Cold coiled helical springs technical specifications - Part 2: Compressions spring
GB/T 13306-2011 — Plates
Secure payment via Stripe
Payments accepted
JB/T 6574-2017
$105.00