JB/T 5513-2006SWC integral yoke cross-shaft universal couplings (English PDF)
SWC型整体叉头十字轴式万向联轴器
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5513-2006 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 27, 2006
Implementation date
May 1, 2007
Scope
JB/T 5513-2006 is the English-translated version of SWC型整体叉头十字轴式万向联轴器.
JB/T 5513-2006 is the Chinese standard "SWC integral yoke cross-shaft universal couplings". Its scope clause reads: This standard specifies the classification, technical requirements, inspection rules, marking, packaging and storage of the SWC universal coupling with whole fork (hereinafter referred to as "the universal coupling").
This standard is applicable to the universal coupling connecting two transmission shaftings of different axes. Its swing diameter is 100 mm ~ 550 mm; nominal transmission torque is 2.5 kN·m ~ 1000 kN·m; and the axis break angle is 15° ~ 25°. Its clauses include classification.
Found what you need?
Document preview — JB/T 5513-2006
National Standard of the People's Republic of China
- Replacing
- JB/T 5513-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Classification
- 4 Technical requirements
- 5 Inspection rules
- 6 Marking, packaging and storage
- Annex A (Normative) Large-size universal coupling
- Annex B (Informative) Selection of universal coupling
1 Scope
This standard specifies the classification, technical requirements, inspection rules, marking, packaging and storage of the SWC universal coupling with whole fork (hereinafter referred to as "the universal coupling").
This standard is applicable to the universal coupling connecting two transmission shaftings of different axes. Its swing diameter is 100 mm ~ 550 mm; nominal transmission torque is 2.5 kN·m ~ 1000 kN·m; and the axis break angle is 15° ~ 25°.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 191 Packaging - Pictorial marking for handling of goods (GB/T 191-2000, egv ISO 780: 1997)
GB/T 1184 Genometrical tolerancing - Geometrical tolerances for features without individual tolerance indications (GB/T 1184-1996, eqv ISO 2768-2: 1989)
GB/T 1800.4 Limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts (GB/T 1800.4-1999, eqv ISO 286-2: 1988)
GB/T 3098.1-2000 Mechanical properties of fasteners - Bolts, screws and studs (idt ISO 898-1: 1999)
GB/T 3098.2-2000 Mechanical properties of fasteners - Nuts - Coarse thread (idt ISO 898-2: 1992)
GB/T 4879 Rustproof packaging
GB/T 6388 Transport package shipping mark
GB/T 7284 Wooden framed case
GB/T 11345 Method for manual ultrasonic testing and classification of testing results for ferritic steel welds
GB/T 13384 General specifications for packing of mechanical and electrical product
JB/T 5000 (all parts) The heavy mechanical general techniques and standards
JB/T 7341.2 Journal cross assembly of universal coupling series - SWC
3 Classification
3.1 Types
The universal couplings are divided into the following seven types, see Table 1.
Table 1 Type of universal coupling […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 5513
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5513-2006 | SWC integral yoke cross-shaft universal couplings | current edition | Current |
| JB/T 5513-1991 | SWC integral yoke cross-shaft universal couplings | previous edition | Superseded |
This page sells the current edition, JB/T 5513-2006. Earlier editions are listed for reference only.
How to Download JB/T 5513-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
Secure payment via Stripe
Payments accepted
JB/T 5513-2006
$385.00