JB/T 7341.2-2006Cross assemblies for SWC cross-shaft universal couplings (English PDF)
十字轴式万向联轴器用十字包 SWC型
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7341.2-2006 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 27, 2006
Implementation date
May 1, 2007
Scope
JB/T 7341.2-2006 is the English-translated version of 十字轴式万向联轴器用十字包 SWC型.
JB/T 7341.2-2006 is the Chinese standard "Cross assemblies for SWC cross-shaft universal couplings".
Its scope clause reads: This part of JB/T 7341 specifies the types and dimensions, technical requirements and inspection rules as well as marking, packaging and storage of journal cross assembly of SWC universal coupling with whole fork (hereinafter referred to as "journal cross assembly").
This part is applicable to journal cross assembly of JB/T 5513 SWC universal coupling with whole fork. Its clauses include types and dimensions.
Found what you need?
Document preview — JB/T 7341.2-2006
National Standard of the People's Republic of China
- Replacing
- JB/T 7341-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Types and dimensions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Cross
- 4.3 Bearings
- 4.4 Assembling
- 5 Inspection rules
- 6 Marking, packaging and storage
1 Scope
This part of JB/T 7341 specifies the types and dimensions, technical requirements and inspection rules as well as marking, packaging and storage of journal cross assembly of SWC universal coupling with whole fork (hereinafter referred to as "journal cross assembly").
This part is applicable to journal cross assembly of JB/T 5513 SWC universal coupling with whole fork.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of JB/T 7341. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document applies.
GB/T 191 Packaging - Pictorial marking for handling of goods (GB/T 191-2000, eqv ISO 780: 1997)
GB/T 307.1 Rolling bearings - Radial bearings - Tolerances (GB/T 307.1-1994, eqv ISO/DIS 492: 1986)
GB/T 1184 Geometrical tolerancing - Geometrical tolerances for features without individual tolerance indications (GB/T 1184-1996, eqv ISO 2768-2: 1989)
GB/T 3203 Specification for carburizing steels of bearings
GB/T 4604 Rolling bearings-Radial internal clearance (GB/T 4604-1993, eqv ISO 5753: 1991)
GB/T 4879 Rustproof packaging
GB/T 6388 Transport package shipping mark
GB/T 7284 Wooden framed case
GB/T 8597 Rolling bearings - Rust proof packaging
JB/T 3016 Rolling bearings - Packaging box - Specifications
JB/T 5000 (all parts) Heavy mechanical general techniques and standards
JB/T 5513 SWC universal coupling with whole fork
JB/T 8881 Specification for carburizing heat treatment of rolling bearing parts
3 Types and dimensions
3.1
See Figure 1 and Table 1 for the journal cross assemblies applicable to short cylindrical roller bearings of SWC universal couplings with a swing diameter of 100 mm to 550 mm in JB/T 5513.
Table 1 […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 7341.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7341.2-2006 | Cross assemblies for SWC cross-shaft universal couplings | current edition | Current |
| JB/T 7341-1994 | Cross assemblies for SWC cross-shaft universal couplings | previous edition | Superseded |
This page sells the current edition, JB/T 7341.2-2006. Earlier editions are listed for reference only.
How to Download JB/T 7341.2-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 7341.1-2005 — Cross assemblies for SWP cross-shaft universal couplings
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
Secure payment via Stripe
Payments accepted
JB/T 7341.2-2006
$55.00