JB/T 5451-2008General technical requirements for microswitches (English PDF)
微动开关 通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5451-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 5451-2008 is the English-translated version of 微动开关 通用技术条件.
JB/T 5451-2008 is a recommended Chinese machinery industry standard carrying the general technical requirements for microswitches used in electrical and electronic equipment, those needed for connecting power included.
Along with the requirements it gives the test methods, the inspection rules and the provisions for packaging, transport and storage. It applies to microswitches whose maximum rated voltage does not exceed 500 V and whose maximum rated current does not exceed 25 A, direct current or alternating current measured as rms.
The standard replaces JB/T 5451-1991. Its Chinese classification is L22 and its international classification 29.120.40.
Found what you need?
Document preview — JB/T 5451-2008
National Standard of the People's Republic of China
- ICS
- 29.120.40
- Replacing
- JB/T 5451-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 5451-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It replaces the earlier edition JB/T 5451-1991.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard carrying the general technical requirements for microswitches used in electrical and electronic equipment, those needed for connecting power included. Along with the requirements it gives the test methods, the inspection rules and the provisions for packaging, transport and storage. It applies to microswitches whose maximum rated voltage does not exceed 500 V and whose maximum rated current does not exceed 25 A, direct current or alternating current measured as rms. The standard replaces JB/T 5451-1991. Its Chinese classification is L22 and its international classification 29.120.40.
JB/T 5451-2008 falls under ICS 29.120.40, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2000 — Packaging-Pictorial marking for handling of goods
GB/T 2421-1999 — Environmental testing for electric and electronic products Part 1: General and guidance
GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan
GB/T 2829-2002 — Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
GB/T 2900.18-1992 — Electrotechnical terminology--Low voltage apparatus
GB/T 4210-2001 — Electrotechnical terminology - Electromechanical components for electronic equipment
GB/T 5095.2-1997 — Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
GB/T 5095.4-1997 — Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 4: Dynamic stress tests
GB/T 5095.5-1997 — Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests
GB/T 5095.6-1997 — Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests
GB/T 5095.7-1997 — Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 7: Mechanical operating tests and sealing tests
GB/T 5095.8-1997 — Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 5451-1991 (earlier edition)
Standards on related subjects:
GB/T 17737.100-2018 — Coaxial communication cables -- Part 1-100: Electrical test methods -- General requirements
GB/T 21711.1-2008 — Electromechanical elementary relays -- Part 1: General and safety requirements
JB/T 5535-2008 — Technical requirements for metal contact single key switches
6 Classification and status
International classification (ICS): 29.120.40
Chinese Standard Classification (CCS): L 22
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2000Graphical symbols marking for handling and storage of packages
- GB/T 2421-1999Environmental testing - General and guidance
- GB/T 2828.1-2003Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829-2002Sampling procedures and tables for periodic inspection by attributes
- GB/T 2900.18-1992Electrotechnical terminology - Low voltage apparatus
- GB/T 4210-2001Electrotechnical terminology -- Electromechanical components for electronic equipment
Editions of JB/T 5451
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5451-2008 | General technical requirements for microswitches | current edition | Current |
| JB/T 5451-1991 | General technical requirements for microswitches | previous edition | Superseded |
This page sells the current edition, JB/T 5451-2008. Earlier editions are listed for reference only.
How to Download JB/T 5451-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products
GB/T 191-2000 — Packaging-Pictorial marking for handling of goods
GB/T 2421-1999 — Environmental testing for electric and electronic products Part 1: General and guidance
JB/T 5451-2008
$195.00