JB/T 5349-2011Special equipment for electric motors - Notching machines (English PDF)
电机专用设备 冲槽机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5349-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
April 1, 2012
Scope
JB/T 5349-2011 is the English-translated version of 电机专用设备 冲槽机.
JB/T 5349-2011 is a recommended Chinese machinery industry standard on special equipment for electric motors, and the machine it covers is the notching machine.
It gives the models of the machine, its technical requirements, the test methods and the inspection rules, the marking, packaging, transport and storage, and also its installation, use and maintenance.
It applies to notching machines of various positioning types, outside positioning among them, used to punch the 0.35 mm to 0.5 mm silicon steel cores of motors and generators.
The 2011 text replaces the 1991 parts JB/T 5349.1, JB/T 5349.2 and JB/T 5349.3. It is classified K97 and 29.100.01.
Found what you need?
Document preview — JB/T 5349-2011
National Standard of the People's Republic of China
- ICS
- 29.100.01
- Replacing
- JB/T 5349.3-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 5349-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 April 2012.
It is one of 4 parts of the JB/T 5349 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on special equipment for electric motors, and the machine it covers is the notching machine. It gives the models of the machine, its technical requirements, the test methods and the inspection rules, the marking, packaging, transport and storage, and also its installation, use and maintenance. It applies to notching machines of various positioning types, outside positioning among them, used to punch the 0.35 mm to 0.5 mm silicon steel cores of motors and generators. The 2011 text replaces the 1991 parts JB/T 5349.1, JB/T 5349.2 and JB/T 5349.3. It is classified K97 and 29.100.01.
JB/T 5349-2011 falls under ICS 29.100.01, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2900.39
GB/T 10095.1
GB/T 10095.2
GB/T 13306
GB/T 13384
GB/T 23644
4 Where this standard sits
It cites 6 standards, listed in full above.
It is one part of the JB/T 5349 series, of which this catalogue holds 4 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 5349.1-1991 — Notching presses - Technical specifications
JB/T 5349.2-1991 — Notching presses - Basic parameters
JB/T 5349.3-1991 — Notching presses - Accuracy
Standards on related subjects:
GB/T 27743-2025 — Inspection method for transformer of special equipment
GB/T 43962.1-2024 — System integration of power battery digital workshop - Part 1: General requirements
GB/T 38331-2019 — General technical requirements for Li-ion battery made machine
JB/T 14966-2025 — Capacitive pulse magnetizer
JB/T 9658-2023 — Special equipment for transformers - Slitting lines for silicon steel sheets
JB/T 3857-2023 — Special equipment for transformers - Horizontal winding machines
7 Classification and status
International classification (ICS): 29.100.01
Chinese Standard Classification (CCS): K 97
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2900.39Electrotechnical terminology - Special equipment for electrical machine and transformer
- GB/T 10095.1Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
- GB/T 10095.2Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations
- GB/T 13306Plates
- GB/T 13384General specifications for packing of mechanical and electrical product
- GB/T 23644General specifications for electrical special equipment
Similar standards
Editions of JB/T 5349
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5349-2011 | Special equipment for electric motors - Notching machines | current edition | Current |
| JB/T 5349.3-1991 | Special equipment for electric motors - Notching machines | previous edition | Superseded |
This page sells the current edition, JB/T 5349-2011. Earlier editions are listed for reference only.
How to Download JB/T 5349-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10095.1-2001 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095.1-2022 — Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
JB/T 5349-2011
$195.00