JB/T 5330-2007Technical requirements for three-phase induction vibration motors (exciting force 0.6 kN to 210 kN) (English PDF)
三相异步振动电机 技术条件(激振力0.6 kN~210 kN)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5330-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 29, 2007
Implementation date
November 1, 2007
Scope
JB/T 5330-2007 is the English-translated version of 三相异步振动电机 技术条件(激振力0.6 kN~210 kN).
JB/T 5330-2007 is the Chinese standard "Technical requirements for three-phase induction vibration motors (exciting force 0.6 kN to 210 kN)".
Its scope clause reads: This standard specifies the terms, basic parameters, technical requirements, test methods and inspection rules as well as marking and packaging requirements of vibrating three-phase asynchronous motor (hereinafter referred to as vibrating motor).
This standard is applicable to the general vibrating motor with rated excited force of 0.6kN~210kN; other special vibrating motors may also refer to this standard. Its clauses include terms, definitions and codes.
Found what you need?
Document preview — JB/T 5330-2007
National Standard of the People's Republic of China
- Replacing
- JB/T 5330-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword I
- 1 Scope
- 2 Normative References
- 3 Terms, Definitions and Codes
- 4 Types, Basic Parameters and Dimensions
- 5 Technical Requirements
- 6 Inspection Rules
- 7 Marking and Packaging
- Appendix A (Informative) Measuring Method for Exciting Force of Vibrating Motor
- Appendix B (Informative) Endurance Vibration Test Method of Vibrating Motor
1 Scope
This standard specifies the terms, basic parameters, technical requirements, test methods and inspection rules as well as marking and packaging requirements of vibrating three-phase asynchronous motor (hereinafter referred to as vibrating motor).
This standard is applicable to the general vibrating motor with rated excited force of 0.6kN~210kN; other special vibrating motors may also refer to this standard.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 191-2000 Packaging - Pictorial Marking for Handling of Goods (eqv ISO 780: 1997)
GB 755-2000 Rotating Electrical Machines - Rating and Performance (idt IEC 60034-1: 1996)
GB/T 1032-2005 Test Procedure for Three-phase Induction Motors
GB/T 1993-1993 Cooling Methods for Rotating Electrical Machines (idt IEC 60034-6: 1991)
GB/T4772.1-1999 Dimensions and Output Series for Rotating Electrical Machines Part 1: Frame Numbers 56 to 400 and Flange Numbers 55 to 1080 (idt IEC 60072-1: 1991)
GB/T 4942.1-2006 Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IEC 60034-5: 2000, IDT)
GB 6995.1~6995.5-1986 Markings for Electric Cables and Wires
GB/T 12665-1990 Requirements of Damp-heat Testing of Electrical Machine for Service in General Environmental Condition
GB 14711-2006 Safety Requirements of Small and Medium Size Rotating Electrical Machines
JB/T 9615.1-2000 Test Methods of the Interturn Insulation on Random Wound Winding for AC Low-voltage Machines
JB/T 9615.2-2000 Test Limits of the Interturn Insulation on Random Wound Winding for AC Low-voltage Machines
3 Terms, Definitions and Codes
For the purposes of this standard, the following terms and definitions apply.
3.1 Rated excited force
The vibration force generated by the self-excitation of vibrating motor where the power supply is of the rated voltage and frequency and the eccentric block of vibrating motor is in the specified position, kN.
3.2 Rated excited power
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- NB/T 10951-2022Vibrating and overturning arc-shaped sieve for coal
- GB/T 35061-2018High-frequency sieve for slime recovery
- SB/T 11129-2015Dry-mixed mortar screening equipment technical specification
- JB/T 11819-2014Specifications for high efficiency three-phase asynchronous vibrating motors (exciting force 0.6 kN to 250 kN)
- JB/T 11300-2012Feed processing machinery - Vibrating grader
Similar standards
Editions of JB/T 5330
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5330-2007 | Technical requirements for three-phase induction vibration motors (exciting force 0.6 kN to 210 kN) | current edition | Current |
| JB/T 5330-1991 | Technical requirements for three-phase induction vibration motors (exciting force 0.6 kN to 210 kN) | previous edition | Superseded |
This page sells the current edition, JB/T 5330-2007. Earlier editions are listed for reference only.
How to Download JB/T 5330-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 5330-2007
$105.00