JB/T 11819-2014Specifications for high efficiency three-phase asynchronous vibrating motors (exciting force 0.6 kN to 250 kN) (English PDF)
高效率三相异步振动电机 技术条件(激振力0.6 kN~250 kN)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11819-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 11819-2014 is the English-translated version of 高效率三相异步振动电机 技术条件(激振力0.6 kN~250 kN).
High efficiency three phase asynchronous vibrating motors are the subject of JB/T 11819-2014, a recommended Chinese machinery industry standard. It provides the terminology for these motors, their basic parameters, the technical requirements, the inspection rules and the provisions for signs and packaging.
It is written for general purpose high efficiency vibrating motors whose rated exciting force runs from 0.6 kN to 250 kN. The Chinese classification is K22 and the international classification 29.160.30, and the Ministry of Industry and Information Technology issued it.
Among the standards it quotes are GB 755-2008, GB/T 1032-2012, GB/T 4942.1-2006, GB/T 22719.1-2008 and JB/T 5330-2007.
Found what you need?
Document preview — JB/T 11819-2014
National Standard of the People's Republic of China
- ICS
- 29.160.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11819-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
High efficiency three phase asynchronous vibrating motors are the subject of JB/T 11819-2014, a recommended Chinese machinery industry standard. It provides the terminology for these motors, their basic parameters, the technical requirements, the inspection rules and the provisions for signs and packaging. It is written for general purpose high efficiency vibrating motors whose rated exciting force runs from 0.6 kN to 250 kN. The Chinese classification is K22 and the international classification 29.160.30, and the Ministry of Industry and Information Technology issued it. Among the standards it quotes are GB 755-2008, GB/T 1032-2012, GB/T 4942.1-2006, GB/T 22719.1-2008 and JB/T 5330-2007.
JB/T 11819-2014 falls under ICS 29.160.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 1032-2012 — Test procedures for three-phase induction motors
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 4772.1-1999 — Dimensions and output series for rotating electrical machines. Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1 080
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB/T 6995.2-2008 — Markings for electric wires and cables - Part 2: Standard colours
GB/T 12665-2008 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
GB 14711
GB/T 22719.1-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 1: Test methods
GB/T 22719.2-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 2: Test limits
JB/T 5330-2007 — Technical requirements for three-phase induction vibration motors (exciting force 0.6 kN to 210 kN)
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 1032-2023 — Test methods for three-phase asynchronous motors
GB/T 13957-2022 — Technical requirements for the fundamental series of three-phase large asynchronous motor
JB/T 1012-2017 — Specification for YY series capacitor-run induction motors
JB/T 12968-2025 — Technical specification for variable frequency speed regulating three-phase asynchronous motors for shield machines
JB/T 11710-2025 — Technical Specifications for YVF Series (IP55) Variable Frequency Speed Regulating Three-Phase Asynchronous Motors (Frame Sizes 355-450)
JB/T 10444-2025 — Technical Specifications and Energy Efficiency Classification for Y2 and YX2 Series of 6kV High-voltage Three-phase Asynchronous Motors (Frame Size 355~ 630)
6 Classification and status
International classification (ICS): 29.160.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB 755-2008Rotating Electrical Machines - Rating and Performance
- GB/T 1032-2012Test methods for three-phase asynchronous motors
- GB/T 1993-1993Cooling methods for rotating electrical machines
- GB/T 4772.1-1999Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
- GB/T 4942.1-2006Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
Similar standards
How to Download JB/T 11819-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14711-1993 — General requirements for safety of small and medium size rotating electrical machines
GB 14711-2006 — Safety requirements of small and medium size rotating electrical machines
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
JB/T 11819-2014
$205.00