JB/T 5278.3-1991Bakeable copper wire sealed vacuum flanges - Structure and dimensions of copper wire sealing rings (English PDF)
铜丝密封可烘烤真空法兰 铜丝密封圈结构尺寸
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5278.3-1991 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 1, 1991
Implementation date
July 1, 1992
Scope
JB/T 5278.3-1991 is the English-translated version of 铜丝密封可烘烤真空法兰 铜丝密封圈结构尺寸.
JB/T 5278.3-1991, the third part of its series, is a recommended Chinese machinery industry standard that fixes the structure and dimensions of the copper sealing ring used in bakeable copper wire sealed vacuum flanges.
It gives the dimensions of the ring together with the technical requirements it must meet. It applies to the flange types specified in JB 5278.1, so the ring it describes is the sealing element of that flange family.
It quotes GB 3109, GB 3119, GB 6070.1 and JB 5278.1, and is classified under J15 for vacuum equipment, with the international class 23.160. Issued on 1 January 1991, it has applied since 1 July 1992.
Found what you need?
Document preview — JB/T 5278.3-1991
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 5278.3-1991 is issued by Ministry of Industry and Information Technology of the People's Republic of China.
It is one of 3 parts of the JB/T 5278 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 5278.3-1991, the third part of its series, is a recommended Chinese machinery industry standard that fixes the structure and dimensions of the copper sealing ring used in bakeable copper wire sealed vacuum flanges. It gives the dimensions of the ring together with the technical requirements it must meet. It applies to the flange types specified in JB 5278.1, so the ring it describes is the sealing element of that flange family. It quotes GB 3109, GB 3119, GB 6070.1 and JB 5278.1, and is classified under J15 for vacuum equipment, with the international class 23.160. Issued on 1 January 1991, it has applied since 1 July 1992.
JB/T 5278.3-1991 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB 3109
GB 3119
GB 6070.1
JB 5278.1
4 Where this standard sits
It cites 4 standards, listed in full above.
It is one part of the JB/T 5278 series, of which this catalogue holds 3 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 5278.1-1991 — Copper Wire Seal Can Be Baked Vacuum Flange Connection Type?
JB/T 5278.2-1991 — Bakeable copper wire sealed vacuum flanges - Structure and dimensions of flanges
7 Classification and status
Chinese Standard Classification (CCS): J 78
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 5278.3-1991
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 6070.1-1985 — Nominal bore for vacuum flanges
JB/T 5278.2-1991 — Bakeable copper wire sealed vacuum flanges - Structure and dimensions of flanges
JB/T 5278.1-1991 — Copper Wire Seal Can Be Baked Vacuum Flange Connection Type?
JB/T 5278.3-1991
$169.00