Valid

JB/T 5102-2011Coordinate cutting machines (English PDF)

坐标式切割机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 5102-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 15, 2011

Implementation date

November 1, 2011

Scope

JB/T 5102-2011 is the English-translated version of 坐标式切割机.

JB/T 5102-2011 is a recommended Chinese machinery industry standard on coordinate cutting machines. It sets out the terms and definitions for the machine, its classification, models and basic parameters, the technical requirements, and the test methods.

It applies to coordinate cutting machines using a flame or plasma heat source, while coordinate cutting machines with other heat sources may be dealt with by reference to it.

The standard is a modified adoption of ISO 8206-1991. Its Chinese classification is J33 and its international classification 25.160.30. It quotes GB 5226.1, GB/T 8923, JB/T 5000.12-2007 and JB/T 5101-1991.

It replaces JB/T 5102-1999 and was issued by the Ministry of Industry and Information Technology.

Found what you need?

Document preview — JB/T 5102-2011

National Standard of the People's Republic of China

ICS
25.160.30
Replacing
JB/T 5102-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 5102-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 August 2011 and has been in force since 1 November 2011.

It replaces the earlier edition JB/T 5102-1999, JB/T 5102-1991.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard on coordinate cutting machines. It sets out the terms and definitions for the machine, its classification, models and basic parameters, the technical requirements, and the test methods. It applies to coordinate cutting machines using a flame or plasma heat source, while coordinate cutting machines with other heat sources may be dealt with by reference to it. The standard is a modified adoption of ISO 8206-1991. Its Chinese classification is J33 and its international classification 25.160.30. It quotes GB 5226.1, GB/T 8923, JB/T 5000.12-2007 and JB/T 5101-1991. It replaces JB/T 5102-1999 and was issued by the Ministry of Industry and Information Technology.

JB/T 5102-2011 falls under ICS 25.160.30, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB 5226.1

GB/T 8923

JB/T 5000.12-2007 — General technical requirements for heavy machinery - Part 12: Painting

JB/T 5101-1991 — Cutting torches for gas cutting machines

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 5102-1999 (earlier edition)

JB/T 5102-1991 (earlier edition)

Standards on related subjects:

GB/T 5293-2018 — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of nonalloy and fine grain steels

JB/T 5000.3-2007 — General technical requirements for heavy machinery - Part 3: Weldments

GB/T 5185-2005 — Welding and allied processes -- Nomenclature of processes and reference numbers

JB/T 7520.1-2017 — Methods for chemical analysis of copper base brazing filler metals - Part 1: Determination of copper content

JB/T 6045-2017 — Fluxes for brazing

JB/T 3223-2017 — Welding consumables quality management procedures

6 Classification and status

International classification (ICS): 25.160.30

Chinese Standard Classification (CCS): J 33

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 5102

EditionTitleRevisionStatus
JB/T 5102-2011Coordinate cutting machinescurrent editionCurrent
JB/T 5102-1999Coordinate cutting machinesprevious editionSuperseded

This page sells the current edition, JB/T 5102-2011. Earlier editions are listed for reference only.

How to Download JB/T 5102-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 5102-2011

$135.00