GB/T 16857.12-2022Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems(CMS) - Part 12: Articulated arm coordinate measurement machines(CMM) (English PDF)
产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第12部分：关节臂式坐标测......
This is a limited preview
Buy now to download the full PDF (64 pages)
Need quotation for your management?
Get a formal quotation for GB/T 16857.12-2022 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
December 30, 2022
Implementation date
April 1, 2023
Scope
GB/T 16857.12-2022 is the English-translated version of 产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第12部分：关节臂式坐标测.......
GB/T 16857.12-2022 is the Chinese standard "Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems(CMS) - Part 12: Articulated arm coordinate measurement machines(CMM)".
Its scope clause reads: This document specifies the acceptance and re-inspection tests for the performance of articulated arm coordinate measuring machines.
This document is intended for use with touch probes and optional optical distance sensor accessories (also known as line laser scanners or line laser probes) Articulated arm coordinate measuring machine.
Acceptance testing is the verification of manufacturer-specified performance by measuring a calibrated detection length. The re-inspection detection is the user can regularly check the joint The performance of the arm type coordinate measuring machine is rechecked.
Detailed information on the testing of scanner accessories is given in Appendix E. This document does not specify the frequency and cycle of testing, nor does it specify which party shall bear the testing costs.
This document states. ---The performance requirements of the articulated arm coordinate measuring machine are specified by the manufacturer or the user; --- The execution mode of the acceptance test and re-inspection test used to prove the specified requirements; ---Conformity determination rules; ---Application of acceptance testing and re-inspection testing.
Found what you need?
Document preview — GB/T 16857.12-2022
National Standard of the People's Republic of China
- ICS
- 17.040.30
- Classification
- J 42
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 symbols
- 5 Rated operating conditions
- 6 Acceptance testing and re-inspection testing
- 7 Qualification judgment
- 8 Applications
- 9 Instructions in product documentation and data sheets
- Appendix A (Informative) Form
- Appendix B (Normative) Standards to reproduce the reference detection length
- Appendix C (Informative) Calibration of Standard
- Appendix D (informative) period check
- Appendix E (Normative) Scanning detection system for testing articulated arm coordinate measuring machines
- Appendix F (Normative) Length error measurement by connecting detection length
- Appendix G (informative) optional gimbal detection size and shape error
- Appendix H (informative) Optional repeatability ranges for length measurement errors
- Appendix I (Informative) Relationship with GPS Matrix Model
1 Scope
This document specifies the acceptance and re-inspection tests for the performance of articulated arm coordinate measuring machines.
This document is intended for use with touch probes and optional optical distance sensor accessories (also known as line laser scanners or line laser probes)
Articulated arm coordinate measuring machine.
Acceptance testing is the verification of manufacturer-specified performance by measuring a calibrated detection length. The re-inspection detection is the user can regularly check the joint
The performance of the arm type coordinate measuring machine is rechecked. Detailed information on the testing of scanner accessories is given in Appendix E.
This document does not specify the frequency and cycle of testing, nor does it specify which party shall bear the testing costs.
This document states.
---The performance requirements of the articulated arm coordinate measuring machine are specified by the manufacturer or the user;
--- The execution mode of the acceptance test and re-inspection test used to prove the specified requirements;
---Conformity determination rules;
---Application of acceptance testing and re-inspection testing.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
ISO 10360-1 Geometric product specification (GPS) acceptance testing and re-inspection testing of coordinate measuring machines - Part 1.Vocabulary uringmachines(CMM)-Part 1.Vocabulary]
Note. GB/T 16857.1-2002 Technical specifications for product geometry (GPS) Coordinate measuring machine acceptance testing and re-inspection testing Part 1.Vocabulary (ISO 10360-1.2000, eqv)
ISO 10360-5 Product geometric specification (GPS) Coordinate measuring system (CMS) acceptance test and re-inspection test Part 5
Sub. Coordinate measuring machines for single- and multi-stylus tactile probing systems using discrete point and/or scanning measurement modes [Geometrical
ISO 10360-8.2013 Product geometric specification (GPS) Coordinate measurement system (CMS) acceptance test and re-inspection test No. 8
Note. GB/T 16857.8-2022 Product Geometry Specification (GPS) Coordinate Measurement System (CMS) Acceptance Test and Re-inspection Test Part 8.
Coordinate measuring machines using optical distance sensors (ISO 10360-8.2013, IDT)
ISO 10360-9.2013 Product geometric specification (GPS) Coordinate measurement system (CMS) acceptance test and re-inspection test No. 9
GB/T 10932 | GB/T 22092 | GB/T 26093 | GB/T 16857.13 | GB/T 16857.8 | GB/T 16857.7 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 64 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 16857.1-2002Geometrical product specification (GPS) -- Acceptance and reverification tests for coordinate measuring machines -- Part 1: Vocabulary
- GB/T 16857.8-2022Geometrical product specifications(GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors
ISO 10360
How to Download GB/T 16857.12-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 16857.1-2002 — Geometrical product specification (GPS) -- Acceptance and reverification tests for coordinate measuring machines -- Part 1: Vocabulary
GB/T 16857.8-2022 — Geometrical product specifications(GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors
GB/T 16857.10-2022 — Geometrical product specifications(GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers
Secure payment via Stripe
Payments accepted
GB/T 16857.12-2022
$525.00