JB/T 4783-2007Road tankers for cryogenic liquid (English PDF)
低温液体汽车罐车
This is a limited preview
Buy now to download the full PDF (35 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4783-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 28, 2007
Implementation date
February 1, 2008
Scope
JB/T 4783-2007 is the English-translated version of 低温液体汽车罐车.
JB/T 4783-2007 is the Chinese standard "Road tankers for cryogenic liquid". Its scope clause reads: This standard specifies technical requirements, test methods, inspection rules as well as identification and marking for tanks of road tankers for cryogenic liquid (hereinafter referred to as "cryogenic road tankers").
This standard is applicable to vacuum-insulated cryogenic road tankers that design pressure of their tanks is not less than 0.1MPa and their volume is greater than 1m3 and they are permanently connected with chassis of the approved road vehicle or frame of the semitrailer.
This standard is not applicable to the design and manufacturing of non-ferrous or non-metal tanks.
For tanks of cryogenic road tankers that can't be designed according to this standard, they are allowed to be designed by the following methods; however, the methods shall be assessed and approved by the National Technical Committee on Boilers and Pressure Vessels of Standardization Administration of China. a) Stress analysis, including finite element method; b) Verification test analysis (such as experimental stress analysis and hydraulic verification test); c) Comparison experience design with comparable in-service structures.
Found what you need?
Document preview — JB/T 4783-2007
National Standard of the People's Republic of China
- Replacing
- JB/T 6897-2000
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword I
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Technical Requirements
- 5 Test Methods
- 6 Inspection Rules
- 7 Identification and Marking
- 8 Delivery Documents
- 9 Storage and Transportation
- Appendix A (Normative) Design Calculation of Safety Relief Device
- Appendix B (Normative) Product Nameplate Format and Content
- Appendix C (Informative annex) Format and Content for Product Quality Certificate
- Appendix D (Informative) Physical Parameters of Common Cryogenic Liquid
1 Scope
1.1
This standard specifies technical requirements, test methods, inspection rules as well as identification and marking for tanks of road tankers for cryogenic liquid (hereinafter referred to as "cryogenic road tankers").
1.2
This standard is applicable to vacuum-insulated cryogenic road tankers that design pressure of their tanks is not less than 0.1MPa and their volume is greater than 1m3 and they are permanently connected with chassis of the approved road vehicle or frame of the semitrailer.
1.3
This standard is not applicable to the design and manufacturing of non-ferrous or non-metal tanks.
1.4
For tanks of cryogenic road tankers that can't be designed according to this standard, they are allowed to be designed by the following methods; however, the methods shall be assessed and approved by the National Technical Committee on Boilers and Pressure Vessels of Standardization Administration of China.
a) Stress analysis, including finite element method;
b) Verification test analysis (such as experimental stress analysis and hydraulic verification test);
c) Comparison experience design with comparable in-service structures.
1.5
When this product is designed, manufactured, tested and inspected according to the enterprise standard, the safety technical requirements in the enterprise standard shall be examined by the National Technical Committee on Boilers and Pressure Vessels of Standardization Administration of China.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, the parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these labels apply. For undated references, the latest edition of the normative document applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 35 pages — is available in the English PDF.
Similar standards
Editions of JB/T 4783
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4783-2007 | Road tankers for cryogenic liquid | current edition | Current |
| JB/T 6897-2000 | Road tankers for cryogenic liquid | previous edition | Superseded |
This page sells the current edition, JB/T 4783-2007. Earlier editions are listed for reference only.
How to Download JB/T 4783-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 106-2024 — Valves marking and coating
JB/T 14540-2024 — Sanitary cam rotor pumps
JB/T 14754-2024 — Equipment for disposal of dead and diseased livestock and poultry
Secure payment via Stripe
Payments accepted
JB/T 4783-2007
$410.00