Valid

JB/T 4703-2000Long welding neck flanges (English PDF)

长颈对焊法兰

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 4703-2000 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 24, 2000

Implementation date

September 30, 2000

Scope

JB/T 4703-2000 is the English-translated version of 长颈对焊法兰.

JB/T 4703-2000 is the Chinese standard "Long welding neck flanges".

Its scope clause reads: This standard specifies the structural style and series dimension of steel pressure vessels welding neck flange This standard is applicable to the steel pressure vessels welding neck flange which nominal pressure is 0.6~ 6.4 MPa, and working temperature is -70 ~450 °C. This standard is applicable to corrosion allowance <=three min. Its clauses include structural style and dimension; selection provisions.

Found what you need?

Document preview — JB/T 4703-2000

National Standard of the People's Republic of China

Replacing
JB 4703-1992

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative References
  • 3 Structural style and dimension
  • 4 Selection provisions
  • 4.3 Flange-used equilong double-end screw bolt shall be in accordance the provisions of JB/T 4

1 Scope

This standard specifies the structural style and series dimension of steel pressure vessels welding neck flange

This standard is applicable to the steel pressure vessels welding neck flange which nominal pressure is 0.6~ 6.4 MPa, and working temperature is -70 ~450 °C.

This standard is applicable to corrosion allowance <=three min

2 Normative References

The involved provisions in the following standard will become the provisions quoted by this standard. When published, all the shown versions are valid. All the standards will be modified, and all parties using this standard shall discuss the possibility of using the latest version.

JB/T 4700 - 2000Classification and technical conditions for pressure vessel flanges

JB/T 4704 - 2000Nonmetallic Gaskets

JB/T 4705 - 2000Spiral Wound Gaskets

JB/T 4706 - 2000metallic-jacketed Gaskets

JB/T 4707 - 2000Stud Bolts

3 Structural style and dimension

The Structural style and dimension of welding neck flange of every kind of sealing surface shall be in accordance with the provisions of figure1 to Figure 6 and Table 2;the quality of flange and lined-ring is listed in Table 2

4 Selection provisions

4.1

The materials of flange and assorted gasket, stud, and screw nut, maximum allowable working pressure, technical conditions and its label shall be in accordance with the provisions of JB/T 4700 4.2 Flange-used nonmetallic gaskets, spiral wound gasket, and metallic-jacketed gaskets shall be in accordance with the provisions of JB/T 4704, JB/T 4705, JB/T 4706 respectively.

4.3

Flange-used equilong double-end screw bolt shall be in accordance the provisions of JB/T 4707 4.4 When the thickness of the butt joint cylinder which is connected with flange, is less than the minimum thickness delta0 of butt cylinder in table 1, it shall meet the requirements of Table 3, and adjust the total height H of flange, and mark it out together with flange's height in flange's label.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 4703

EditionTitleRevisionStatus
JB/T 4703-2000Long welding neck flangescurrent editionCurrent
JB 4703-1992Long welding neck flangesprevious editionSuperseded

This page sells the current edition, JB/T 4703-2000. Earlier editions are listed for reference only.

How to Download JB/T 4703-2000

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 4703-2000

$85.00