Valid

JB/T 4333.2-2005Chamber filter presses and plate and frame filter presses - Part 2: Technical requirements (English PDF)

厢式压滤机和板框压滤机 第2部分:技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 4333.2-2005 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

March 19, 2005

Implementation date

September 1, 2005

Scope

JB/T 4333.2-2005 is the English-translated version of 厢式压滤机和板框压滤机 第2部分:技术条件.

JB/T 4333.2-2005 is the Chinese machinery industry standard covering chamber filter presses and plate and frame filter presses, Part 2: Technical requirements. It was issued on 19 March 2005 and has been in force since 1 September 2005, replacing JB/T 8104-1999.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2005 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 4333.2-2005

National Standard of the People's Republic of China

Replacing
JB/T 8104-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Requirements
  • 4.1 Basic requirements
  • 4.2 Overall performance requirements
  • 4.3 Safety requirements
  • 4.4 Requirements for materials and purchased parts
  • 4.5 Requirements for main parts
  • 4.6 Appearance quality requirements
  • 4.7 Configuration requirements of filter press
  • 4.8 Reliability of control devices and actuators
  • 4.9 Filter area
  • 4.10 Filter chamber volume
  • 5 Test method
  • 5.1 Instrument and meter rating
  • 5.2 Tightness of the overall filter chamber
  • 5.3 Strength of each main stressed component
  • 5.4 Clearance between filter plate and filter frame
  • 5.5 Tightness of hydraulic pressure device
  • 5.6 Noise
  • 5.7 Cleanliness of hydraulic system
  • 5.8 Deviation of filter belt
  • 5.9 Electrical control device
  • 5.10 Intergranular corrosion of stainless steel welds
  • 5.11 Appearance quality (misalignment of filter plate)
  • 5.12 Reliability of control devices and actuators
  • 5.13 Filter area
  • 5.14 Filter chamber volume
  • 6 Inspection rules
  • 6.1 General
  • 6.2 Exit-factory inspection
  • 6.3 Type inspection
  • 7 Marking, packaging, transportation, storage
  • 7.1 Marking
  • 7.2 Packaging
  • 7.3 Transportation
  • 7.4 Storage

1 Foreword

JB/T 4333.2-2005 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 19 March 2005 and has been in force since 1 September 2005.

It is one of 9 parts of the JB/T 4333 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

JB/T 4333.2-2005 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

JB/T 4333-1992 — Specification for chamber filter presses

JB/T 4333-1997 — Chamber filter presses and plate-and-frame filter presses - Technical specifications

JB/T 4333.1-2005 — Part 1: Types and basic parameters

JB/T 4333.1-2013 — Recessed plate filter press & plate and frame filter press - Part 1: Types and basic parameters

JB/T 4333.3-2005 — Part 3: Filter plates

JB/T 4333.3-2013 — Recessed plate filter press & plate and frame filter press - Part 3: Filter plate

JB/T 4333.4-2005 — Part 4: Membrane filter plates

JB/T 4333.4-2013 — Recessed filter press & plate and frame filter press - Part 4: Membrane plate

Other editions:

JB/T 4333.2-2013 (later edition)

5 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 4333.2

EditionTitleRevisionStatus
JB/T 4333.2-2005Chamber filter presses and plate and frame filter presses - Part 2: Technical requirementscurrent editionCurrent
JB/T 8104-1999Chamber filter presses and plate and frame filter presses - Part 2: Technical requirementsprevious editionSuperseded

This page sells the current edition, JB/T 4333.2-2005. Earlier editions are listed for reference only.

How to Download JB/T 4333.2-2005

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 4333.2-2005

$105.00