JB/T 4333.1-2013Recessed plate filter press & plate and frame filter press - Part 1: Types and basic parameters (English PDF)

1 Foreword

JB/T 4333.1-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.

It replaces the earlier edition JB/T 4333.1-2005.

It is one of 8 parts of the JB/T 4333 series.

2 Scope

JB/T 4333.1-2013 is a recommended Chinese machinery industry standard for recessed plate filter presses and for plate and frame filter presses. This first part sets the types of these machines and their basic parameters. It applies to horizontal recessed plate filter presses and to plate and frame filter presses, referred to in the text as filters. The standard carries Chinese classification J77 and international classification 73.120. It quotes GB/T 4774 and GB/T 7780. It replaces JB/T 4333.1-2005. The Ministry of Industry and Information Technology issued it.

3 Normative references

JB/T 4333.1-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 4774

GB/T 7780

4 About this standard

Issued by: MIIT

English translation: about 15 pages

5 Related standards

Other parts of this standard:

JB/T 4333-1997 — Chamber filter presses and plate-and-frame filter presses - Technical specifications

JB/T 4333.2-2005 — Chamber filter presses and plate and frame filter presses - Part 2: Technical requirements

JB/T 4333.2-2013 — 2: Technical specifications

JB/T 4333.3-2005 — Chamber filter presses and plate and frame filter presses - Part 3: Filter plates

JB/T 4333.3-2013 — 3: Filter plate

JB/T 4333.4-2005 — Chamber filter presses and plate and frame filter presses - Part 4: Membrane filter plates

JB/T 4333.4-2013 — Recessed filter press & plate and frame filter press - Part 4: Membrane plate

Other editions:

JB/T 4333.1-2005 (earlier edition)

6 Classification and status

International classification (ICS): 73.120

Prefix JB/T: recommended standard.