JB/T 4278.17-2011Verification procedure for test equipment of rubber plastic wire and cable - Part 17: Carbon black content test device (English PDF)
橡皮塑料电线电缆试验仪器设备检定方法 第17部分:碳黑含量试验装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4278.17-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 4278.17-2011 is the English-translated version of 橡皮塑料电线电缆试验仪器设备检定方法 第17部分:碳黑含量试验装置.
JB/T 4278.17-2011 is a recommended standard of the Chinese machinery industry that gives the verification procedure for the carbon black content test device used on rubber and plastic insulated wire and cable, the seventeenth part of the JB/T 4278 series.
It lists the items to be verified and the technical requirements placed on the equipment, names the apparatus used for the verification, and sets out the test methods and the handling of the results.
It applies to the verification of such equipment when newly manufactured, when in service and after repair. It quotes JB/T 4278.1-2011. The standard is filed under Chinese classification K13 and international classification 29.060.
Found what you need?
Document preview — JB/T 4278.17-2011
National Standard of the People's Republic of China
- ICS
- 29.060
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 4278.17-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It is one of 29 parts of the JB/T 4278 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended standard of the Chinese machinery industry that gives the verification procedure for the carbon black content test device used on rubber and plastic insulated wire and cable, the seventeenth part of the JB/T 4278 series. It lists the items to be verified and the technical requirements placed on the equipment, names the apparatus used for the verification, and sets out the test methods and the handling of the results. It applies to the verification of such equipment when newly manufactured, when in service and after repair. It quotes JB/T 4278.1-2011. The standard is filed under Chinese classification K13 and international classification 29.060.
JB/T 4278.17-2011 falls under ICS 29.060, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
JB/T 4278.1-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 1: General
4 Where this standard sits
It cites one other standard, JB/T 4278.1-2011, listed in full above.
It is one part of the JB/T 4278 series, of which this catalogue holds 29 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 4278.1-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - General
JB/T 4278.1-2011 — Part 1: General
JB/T 4278.2-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Low temperature impact test apparatus
JB/T 4278.2-2011 — Part 2: Low temperature impact test device
JB/T 4278.3-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Flexing test apparatus
JB/T 4278.3-2011 — Part 3: Flexing test device
JB/T 4278.4-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Abrasion test apparatus
JB/T 4278.4-2011 — Part 4: Abrasion test device
JB/T 4278.5-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - DZ-1 test apparatus for vertical burning of single wires and cables
JB/T 4278.5-2011 — Part 5: Single insulated wire and cable vertical burning test device
JB/T 4278.6-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Natural ventilation heat ageing test chambers
JB/T 4278.6-2011 — Part 6: Natural ventilation thermal aging test oven
JB/T 4278.7-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Constant temperature water baths
JB/T 4278.7-2011 — Part 7: Thermostat water bath
JB/T 4278.8-1993 — Verification methods for test instruments and equipment for rubber and plastic insulated wires and cables - Low temperature test chambers
JB/T 4278.8-2011 — Part 8: Low temperature test oven
JB/T 4278.9-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Oxygen bomb and air bomb ageing test chambers
JB/T 4278.9-2011 — Part 9: Oxygen bomb, air bomb aging test oven
JB/T 4278.10-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Spark testers
JB/T 4278.10-2011 — Part 10: Spark tester
JB/T 4278.11-2011 — Verification procedure for test equipment of rubber and plastic wires and cables - Part 11: Low temperature bending test device
JB/T 4278.12-2011 — Part 12: High temperature pressure test device
JB/T 4278.13-2011 — Part 13: Forced air heat aging test oven
JB/T 4278.14-2011 — Part 14: Fire-resisting test device
JB/T 4278.15-2011 — Part 15: Bundle burning test device
JB/T 4278.16-2011 — Part 16: Smoke density test device
JB/T 4278.18-2011 — Part 18: Copper single insulated wire and cable vertical burning test device
JB/T 4278.19-2011 — Part 19: Insulation scrape abrasion test device
Standards on related subjects:
GB/T 5013.1-2008 — Rubber insulated cables of rated voltages up to and including 450/750 V -- Part 1: General requirements
GB/T 3956-2008 — Conductors of insulated cables
7 Classification and status
International classification (ICS): 29.060
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 4278.17-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 4278.1-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 1: General
JB/T 4278.18-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 18: Copper single insulated wire and cable vertical burning test device
JB/T 4278.16-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 16: Smoke density test device
JB/T 4278.17-2011
$149.00