JB/T 4208.7-1996Common parts for cold heading dies - Cutters - Type G (English PDF)
冷镦模具通用件 切料刀 G型
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4208.7-1996 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
September 3, 1996
Implementation date
July 1, 1997
Scope
JB/T 4208.7-1996 is the English-translated version of 冷镦模具通用件 切料刀 G型.
JB/T 4208.7-1996 is the Chinese machinery industry standard covering common parts for cold heading dies - Cutters - Type G. It was issued on 3 September 1996 and has been in force since 1 July 1997, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1996 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 4208.7-1996
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 4208.7-1996 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 3 September 1996 and has been in force since 1 July 1997.
It is one of 23 parts of the JB/T 4208 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 4208.7-1996 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 4208.1-1996 — Common parts for cold heading dies - Cutters - Type A
JB/T 4208.1-2014 — Common parts of cold heading dies for fasteners - Part 1: Cutters
JB/T 4208.2-1996 — Common parts for cold heading dies - Cutters - Type B
JB/T 4208.2-2014 — Common parts of cold heading dies for fasteners - Part 2: Cutter clamping plates
JB/T 4208.3-1996 — Common parts for cold heading dies - Cutters - Type C
JB/T 4208.3-2014 — Common parts of cold heading dies for fasteners - Part 3: Cutting dies
JB/T 4208.4-1996 — Common parts for cold heading dies - Cutters - Type D
JB/T 4208.4-2014 — Common parts of cold heading dies for fasteners - Part 4: Reducing dies
JB/T 4208.5-1996 — Common parts for cold heading dies - Cutters - Type E
JB/T 4208.5-2014 — General Parts of Cold Heading Dies for Fasteners - Part 5: Knock-out Bar
JB/T 4208.6-1996 — Common parts for cold heading dies - Cutters - Type F
JB/T 4208.8-1996 — Cutter clamping plates - Type A
JB/T 4208.9-1996 — Cutter clamping plates - Type B
JB/T 4208.10-1996 — Cut-off dies - Type A
JB/T 4208.11-1996 — Cut-off dies - Type B
JB/T 4208.12-1996 — Cut-off dies - Type C
JB/T 4208.13-1996 — Cut-off dies - Type D
JB/T 4208.14-1996 — Reducing dies - Type A
JB/T 4208.15-1996 — Reducing dies - Type B
JB/T 4208.16-1996 — Knockout pins - Type A
JB/T 4208.17-1996 — Knockout pins - Type B
JB/T 4208.18-1996 — Knockout pins - Type C
Standards on related subjects:
GB/T 45677-2025 — Forming moulds of composite material for upper cover of new energy vehicle battery pack
GB/T 6110-2021 — Drawing dies—Carbide alloy drawing dies—Structural types and dimensions
JB/T 3943-2017 — Drawing dies - Carbide drawing dies - Technical requirements
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 4208.7-1996
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 4208.8-1996 — Common parts for cold heading dies - Cutter clamping plates - Type A
JB/T 4208.6-1996 — Common parts for cold heading dies - Cutters - Type F
JB/T 4208.9-1996 — Common parts for cold heading dies - Cutter clamping plates - Type B
JB/T 4208.7-1996
$85.00