JB/T 3364.3-2011Circular sawing machines - Part 3: Technical requirements (English PDF)
圆锯床 第3部分:技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 3364.3-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 3364.3-2011 is the English-translated version of 圆锯床 第3部分:技术条件.
JB/T 3364.3-2011 is the recommended Chinese machinery industry standard holding the technical requirements among the parts on circular sawing machines. The technical conditions it lays down are those for the manufacture of the machine and for its acceptance.
Horizontal circular sawing machines, vertical ones and tilting ones with a maximum saw blade diameter from 315 mm to 2000 mm are what it applies to, and machines whose maximum saw blade diameter falls below 315 mm or rises above 2000 mm may be handled by reference to it.
Among the standards it quotes are GB 5226.1, GB/T 9061-2006, GB 15760, GB/T 23570-2009 and JB/T 9876-1999. Its classification is J57 in the Chinese system and 25.080.60 internationally. It replaces JB/T 3364.3-1999.
Found what you need?
Document preview — JB/T 3364.3-2011
National Standard of the People's Republic of China
- ICS
- 25.080.60
- Replacing
- JB/T 3364.3-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 3364.3-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It replaces the earlier edition JB/T 3364.3-1999.
It is one of 6 parts of the JB/T 3364 series.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard holding the technical requirements among the parts on circular sawing machines. The technical conditions it lays down are those for the manufacture of the machine and for its acceptance. Horizontal circular sawing machines, vertical ones and tilting ones with a maximum saw blade diameter from 315 mm to 2000 mm are what it applies to, and machines whose maximum saw blade diameter falls below 315 mm or rises above 2000 mm may be handled by reference to it. Among the standards it quotes are GB 5226.1, GB/T 9061-2006, GB 15760, GB/T 23570-2009 and JB/T 9876-1999. Its classification is J57 in the Chinese system and 25.080.60 internationally. It replaces JB/T 3364.3-1999.
JB/T 3364.3-2011 falls under ICS 25.080.60, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 5226.1
GB/T 9061-2006 — General specifications for metal-cutting machine tools
GB 15760
GB 16454
GB/T 16769-2008 — Metal-cutting machine tools -- Measurement method of sound pressure level
GB/T 23570-2009 — Welding parts for metal cutting machines - General specifications
GB/T 23572-2009 — Hydraulic system general specifications for metel-cutting machine tools
JB/T 3364.2
JB/T 3364.4
JB/T 9872-1999 — Metal cutting machine tools - General technical requirements for machined parts
JB/T 9874-1999 — Metal cutting machine tools - General technical requirements for assembly
JB/T 9876-1999 — Metal cutting machine tools - Inspection and evaluation of contact surfaces by colouring method
4 Where this standard sits
It cites 12 standards, among them GB/T 9061-2006, GB/T 16769-2008, GB/T 23570-2009, listed in full above.
It is one part of the JB/T 3364 series, of which this catalogue holds 6 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 3364.1-1999 — Horizontal circular sawing machines - Parameters
JB/T 3364.1-2011 — 1: Types and parameters
JB/T 3364.2-1999 — Horizontal circular sawing machines - Testing of accuracy
JB/T 3364.2-2011 — 2: Testing of the accuracy
JB/T 3364.4-2011 — 4: Spindle nose connection dimensions
Other editions:
JB/T 3364.3-1999 (earlier edition)
Standards on related subjects:
JB/T 12396-2015 — Proportional valve solenoids
JB/T 8490-2008 — Floor-type boring machines and floor-type milling and boring machines - Technical requirements
GB 16454-2008 — Sawing machines for metal cutting -- Safeguarding specifications
JB/T 3367.1-2014 — Horizontal Internal Broaching Machines - Part 1: Parameters
7 Classification and status
International classification (ICS): 25.080.60
Chinese Standard Classification (CCS): J 57
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 9061-2006Metal-cutting machine tools - General specifications
- GB 15760Metal cutting machines - General specifications for safeguarding
- GB 16454Sawing machines for metal cutting -- Safeguarding specifications
- GB/T 16769-2008Metal-cutting machine tools -- Measurement method of sound pressure level
- GB/T 23570-2009Welding parts for metal cutting machines - General specifications
Similar standards
Editions of JB/T 3364.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 3364.3-2011 | Circular sawing machines - Part 3: Technical requirements | current edition | Current |
| JB/T 3364.3-1999 | Circular sawing machines - Part 3: Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 3364.3-2011. Earlier editions are listed for reference only.
How to Download JB/T 3364.3-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 15760-1995 — Metal-cutting machine tools--General safeguarding specification
GB 15760-2004 — Metal-cutting machine tools - General safeguarding specification
GB 15760-2025 — Metal cutting machines - General specifications for safeguarding
JB/T 3364.3-2011
$169.00