JB/T 20160-2013Filling and sealing machines for prefilled syringes (English PDF)
预灌液注射器灌封机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 20160-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 22, 2013
Implementation date
December 1, 2013
Scope
JB/T 20160-2013 is the English-translated version of 预灌液注射器灌封机.
JB/T 20160-2013 is a recommended Chinese machinery industry standard for the filling and sealing machines used with prefilled syringes.
The standard covers the designation and marking of such machines, the requirements they must meet, the test methods used to check them, the inspection rules applied, and the provisions on signs, the instructions for use, packaging, transport and storage.
For classification it carries C92 in the Chinese scheme and 11.120.30 in the international scheme. Among the standards it quotes are GB 5226.1-2008, GB/T 9969, GB/T 16769-2008, GB/T 24342-2009 and YBB 0011-2004.
Found what you need?
Document preview — JB/T 20160-2013
National Standard of the People's Republic of China
- ICS
- 11.120.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 20160-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 July 2013 and has been in force since 1 December 2013.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the filling and sealing machines used with prefilled syringes. The standard covers the designation and marking of such machines, the requirements they must meet, the test methods used to check them, the inspection rules applied, and the provisions on signs, the instructions for use, packaging, transport and storage. For classification it carries C92 in the Chinese scheme and 11.120.30 in the international scheme. Among the standards it quotes are GB 5226.1-2008, GB/T 9969, GB/T 16769-2008, GB/T 24342-2009 and YBB 0011-2004.
JB/T 20160-2013 falls under ICS 11.120.30, in the field of health care technology.
This catalogue holds 125 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388
GB/T 9969
GB/T 10111
GB/T 13306
GB/T 13384
GB/T 16769-2008 — Metal-cutting machine tools -- Measurement method of sound pressure level
GB/T 24342-2009 — Electrical equipment of industrial machines - Continuity of the protective bonding circuit test specifications
YBB 0011-2004 — Yuguanfengzhusheqi Zuhejian(Daizhushezhen) Assemblages for prefilled syringes(with stainless steel needles)
YBB 0006-2004
YBB 0007-2004 — YuguanfengZhuseqiyong Lvhuadingjixiangjiaohuosai Chlorobutyl rubber plungers for prefilled syringes
YBB 0008-2004 — Yuguanfengzhusheqiyong Xiuhuadingjixiangjiaohuosai Bromoburyl rubber plungers for prefilled syringes
YBB 0009-2004 — Yuguanfengzhusheqiyong Buxiugang Zhushezhen Stainless steel needles for prefilled syringes
YBB 0010-2004 — Yuguanfengzhusheqiyong Juyiwuerxixiangjiao Zhengtuohumao Polyisoprene rubber caps for neeles for prefilled syrings
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 36030-2018 — General technical requirements of CIP and SIP for pharmaceutical machinery
JB/T 20032-2012 — Series vacuum freezing dryer for pharmaceutics
JB/T 20104-2007 — Tablet hardness testers
JB/T 20168-2015 — Hard Capsule Weight Inspection Machine
JB/T 20162-2014 — Desiccant Package Inserter for Drug Bottle
JB/T 20161-2014 — Air-flow powder filling machines for antibiotic glass vials
6 Classification and status
International classification (ICS): 11.120.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6388Transport package shipping mark
- GB/T 9969General principles for preparation of instructions for use of industrial products
- GB/T 10111Generation of random numbers and procedures applied to sampling inspection for product quality
- GB/T 13306Plates
Similar standards
How to Download JB/T 20160-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 10111-1988 — Methods for random sampling by utilizing dices of random number
GB/T 10111-2008 — Generation of random numbers and procedures applied to sampling inspection for product quality
JB/T 20160-2013
$105.00