JB/T 20158-2013Pharmaceutical cleaning in place equipment (English PDF)
制药设备在位清洗装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 20158-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 22, 2013
Implementation date
December 1, 2013
Scope
JB/T 20158-2013 is the English-translated version of 制药设备在位清洗装置.
JB/T 20158-2013 is a recommended Chinese machinery industry standard for cleaning in place equipment serving pharmaceutical plant. It gives the classification and marking of these cleaning devices, then their requirements, the test methods and the inspection rules, and finally the signs, instructions, packaging, transportation and storage.
The devices in scope are the cleaning in place units fitted to pharmaceutical equipment. The document quotes a wide set of references, among them GB 150.1 to GB 150.4, GB/T 191, GB/T 1226, GB/T 4272-2008, GB 5226.1-2008, GB/T 9969, GB 12241, GB/T 13306, GB/T 16769, GB/T 24342-2009 and TSG R0004-2009.
It was issued by the Ministry of Industry and Information Technology and carries Chinese classification C92 with international classification 11.120.30.
Found what you need?
Document preview — JB/T 20158-2013
National Standard of the People's Republic of China
- ICS
- 11.120.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 20158-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 July 2013 and has been in force since 1 December 2013.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for cleaning in place equipment serving pharmaceutical plant. It gives the classification and marking of these cleaning devices, then their requirements, the test methods and the inspection rules, and finally the signs, instructions, packaging, transportation and storage. The devices in scope are the cleaning in place units fitted to pharmaceutical equipment. The document quotes a wide set of references, among them GB 150.1 to GB 150.4, GB/T 191, GB/T 1226, GB/T 4272-2008, GB 5226.1-2008, GB/T 9969, GB 12241, GB/T 13306, GB/T 16769, GB/T 24342-2009 and TSG R0004-2009. It was issued by the Ministry of Industry and Information Technology and carries Chinese classification C92 with international classification 11.120.30.
JB/T 20158-2013 falls under ICS 11.120.30, in the field of health care technology.
This catalogue holds 125 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 150.1
GB 150.2
GB 150.3
GB 150.4
GB/T 191
GB/T 1226
GB/T 4272-2008 — General principles for thermal insulation technique of equipment and pipes
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 9969
GB/T 10111
GB 12241
GB/T 13306
GB/T 13384
GB/T 16769
GB/T 24342-2009 — Electrical equipment of industrial machines - Continuity of the protective bonding circuit test specifications
TSGR 0004-2009 — Supervision Regulation on Safety Technology for Stationary Pressure Vessel ,including Amendment 1
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 36030-2018 — General technical requirements of CIP and SIP for pharmaceutical machinery
JB/T 20032-2012 — Series vacuum freezing dryer for pharmaceutics
JB/T 20104-2007 — Tablet hardness testers
JB/T 20168-2015 — Hard Capsule Weight Inspection Machine
JB/T 20162-2014 — Desiccant Package Inserter for Drug Bottle
JB/T 20161-2014 — Air-flow powder filling machines for antibiotic glass vials
6 Classification and status
International classification (ICS): 11.120.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150.1Pressure vessels—Part 1:General requirements
- GB 150.2Pressure Vessels-Part 2: Materials
- GB 150.3Pressure Vessels -Part3: Design
- GB 150.4Pressure Vessels --Part 4: Fabrication, inspection and testing, and acceptance
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1226General pressure gauge
GB 12241 · TSGR 0004-2009
Similar standards
How to Download JB/T 20158-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 20158-2013
$105.00