JB/T 20028-2017Capsule and tablet printing machines (English PDF)
胶囊片剂印字机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 20028-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2017
Implementation date
April 1, 2018
Scope
JB/T 20028-2017 is the English-translated version of 胶囊片剂印字机.
JB/T 20028-2017 is a recommended Chinese machinery industry standard for capsule and tablet printing machines. It gives their classification and marking, the requirements placed on them, the test methods and the inspection rules, and then the signs, the instructions for use, the packaging, the transport and the storage.
It replaces JB/T 20028-2004. Among the standards it quotes are GB/T 191, GB/T 2411, GB 5226.1-2008, GB/T 7932, GB/T 9969.1, GB/T 14436, GB/T 24342-2009 and JB/T 20188-2017.
Its Chinese classification is C92 and its international classification 11.120.30, and it was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 20028-2017
National Standard of the People's Republic of China
- ICS
- 11.120.30
- Replacing
- JB 20028-2004
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 20028-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2017 and has been in force since 1 April 2018.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for capsule and tablet printing machines. It gives their classification and marking, the requirements placed on them, the test methods and the inspection rules, and then the signs, the instructions for use, the packaging, the transport and the storage. It replaces JB/T 20028-2004. Among the standards it quotes are GB/T 191, GB/T 2411, GB 5226.1-2008, GB/T 7932, GB/T 9969.1, GB/T 14436, GB/T 24342-2009 and JB/T 20188-2017. Its Chinese classification is C92 and its international classification 11.120.30, and
JB/T 20028-2017 falls under ICS 11.120.30, in the field of health care technology.
This catalogue holds 125 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 2411
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388
GB/T 7932
GB/T 9969.1
GB/T 10111
GB/T 13306
GB/T 13384
GB/T 14436
GB/T 16769
GB/T 24342-2009 — Electrical equipment of industrial machines - Continuity of the protective bonding circuit test specifications
JB/T 20188-2017 — Pharmaceutical machinery - Type designation method
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 36030-2018 — General technical requirements of CIP and SIP for pharmaceutical machinery
JB/T 20032-2012 — Series vacuum freezing dryer for pharmaceutics
JB/T 20104-2007 — Tablet hardness testers
JB/T 20022-2017 — Punches and dies for ZP series tablet presses
JB/T 20029-2016 — Thermocompression water distillers
JB/T 20023-2016 — Pharmaceutical blister packaging machines
6 Classification and status
International classification (ICS): 11.120.30
Chinese Standard Classification (CCS): C 92
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2411Plastics and ebonite -- Determination of indentation hardness by means of a durometer (shore hardness)
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6388Transport package shipping mark
- GB/T 7932Pneumatic fluid power -- General rules and safety requirements for systems and their components
- GB/T 10111Generation of random numbers and procedures applied to sampling inspection for product quality
GB/T 9969.1
Similar standards
Editions of JB/T 20028
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 20028-2017 | Capsule and tablet printing machines | current edition | Current |
| JB 20028-2004 | Capsule and tablet printing machines | previous edition | Superseded |
This page sells the current edition, JB/T 20028-2017. Earlier editions are listed for reference only.
How to Download JB/T 20028-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 10111-1988 — Methods for random sampling by utilizing dices of random number
GB/T 10111-2008 — Generation of random numbers and procedures applied to sampling inspection for product quality
JB/T 20028-2017
$145.00