JB/T 20003.1-2004Eye drop production lines (English PDF)
滴眼剂联动线
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 20003.1-2004 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 1, 2004
Implementation date
January 1, 2004
Scope
JB/T 20003.1-2004 is the English-translated version of 滴眼剂联动线.
JB/T 20003.1-2004 opens the recommended Chinese machinery industry standard series on eye drop production lines, the linked lines that fill and finish eye drops.
This first part gives the classification and marking of the line, the requirements it must meet, the test methods and the inspection rules for the installation taken as a whole.
It applies to production lines working with plastic eye drop bottles. It is used with the other parts of the series, JB 20003.2, JB 20003.3, JB 20003.4 and JB 20003.5, and with GB/T 191, GB 5226.1-2002, GB/T 6388, GB/T 9969.1, GB/T 10111, GB/T 13306, GB/T 13384, GB/T 16769 and YY/T 0216-1995. It was issued on 1 January 2004.
Found what you need?
Document preview — JB/T 20003.1-2004
National Standard of the People's Republic of China
- ICS
- 11.120.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 20003.1-2004 is issued by Ministry of Industry and Information Technology of the People's Republic of China.
It is one of 5 parts of the JB/T 20003 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 20003.1-2004 opens the recommended Chinese machinery industry standard series on eye drop production lines, the linked lines that fill and finish eye drops. This first part gives the classification and marking of the line, the requirements it must meet, the test methods and the inspection rules for the installation taken as a whole. It applies to production lines working with plastic eye drop bottles. It is used with the other parts of the series, JB 20003.2, JB 20003.3, JB 20003.4 and JB 20003.5, and with GB/T 191, GB 5226.1-2002, GB/T 6388, GB/T 9969.1, GB/T 10111, GB/T 13306, GB/T 13384, GB/T 16769 and YY/T 0216-1995. It was issued on 1 January 2004.
JB/T 20003.1-2004 falls under ICS 11.120.30, in the field of health care technology.
This catalogue holds 125 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388
GB/T 9969.1
GB/T 10111
GB/T 13306
GB/T 13384
GB/T 16769
JB 20003.2
JB 20003.3
JB 20003.4
JB 20003.5
YY/T 0216-1995 — Method for compiling model designations of pharmaceutical machinery products
4 Where this standard sits
It cites 13 standards, among them GB 5226.1-2002, YY/T 0216-1995, listed in full above.
It is one part of the JB/T 20003 series, of which this catalogue holds 5 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 20003.2-2004 — Eye drop production lines - Washing machines
JB/T 20003.3-2004 — Eye drop production lines - Tunnel dryers
JB/T 20003.4-2004 — Eye drop production lines - Filling, stoppering and capping machines
JB/T 20003.5-2004 — Eye drop production lines - Labeling machines
7 Classification and status
International classification (ICS): 11.120.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 5226.1-2002Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6388Transport package shipping mark
- GB/T 10111Generation of random numbers and procedures applied to sampling inspection for product quality
- GB/T 13306Plates
- GB/T 13384General specifications for packing of mechanical and electrical product
GB/T 9969.1 · JB 20003.2 · JB 20003.3 · JB 20003.4 · JB 20003.5
Similar standards
How to Download JB/T 20003.1-2004
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 10111-1988 — Methods for random sampling by utilizing dices of random number
GB/T 10111-2008 — Generation of random numbers and procedures applied to sampling inspection for product quality
JB/T 20003.1-2004
$269.00