JB/T 1757-2008Valve components - Ferrules and ferrule nuts (English PDF)
阀门零部件 卡套、卡套螺母
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 1757-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
JB/T 1757-2008 is the English-translated version of 阀门零部件 卡套、卡套螺母.
Ferrules and ferrule nuts for valves are the subject of JB/T 1757-2008, a recommended Chinese machinery industry standard.
It gives the structural form, the dimensions and the technical requirements of both parts, and the application it states is forged steel valves of nominal pressure up to PN40 and nominal size DN6 to DN25 that use ferrules and ferrule nuts.
JB/T 1757-1991 and JB/T 1758-1991 are recorded as superseded. Among the standards it quotes are GB/T 196-2003, GB/T 197-2003, GB/T 699-1999 and GB/T 1804-2000. The entry gives Chinese classification J16.
Found what you need?
Document preview — JB/T 1757-2008
National Standard of the People's Republic of China
- ICS
- 23.060
- Replacing
- JB/T 1758-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 1757-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.
It replaces the earlier edition JB/T 1757-1991.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Ferrules and ferrule nuts for valves are the subject of JB/T 1757-2008, a recommended Chinese machinery industry standard. It gives the structural form, the dimensions and the technical requirements of both parts, and the application it states is forged steel valves of nominal pressure up to PN40 and nominal size DN6 to DN25 that use ferrules and ferrule nuts. JB/T 1757-1991 and JB/T 1758-1991 are recorded as superseded. Among the standards it quotes are GB/T 196-2003, GB/T 197-2003, GB/T 699-1999 and GB/T 1804-2000. The entry gives Chinese classification J16.
JB/T 1757-2008 falls under ICS 23.060, in the field of fluid systems and general-purpose components.
This catalogue holds 421 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 196-2003 — General purpose metric screw threads - Basic dimensions
GB/T 197-2003 — General purpose metric screw threads – Tolerances
GB/T 699-1999 — [Replaced by GB/T 699-2015] Quality carbon structural steels
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 1757-1991 (earlier edition)
Standards on related subjects:
GB/T 8464-2023 — Cast iron, copper and stainless steel valves with screwed connections
HG/T 4304-2012 — Corrosion-resistant polyolefin (PO) plastic linings - Technical specifications
JB/T 106-2004 — Valves - Marking and painting
JB/T 1308.1-2025 — PN2500 Ultra-high pressure valve and fitting - Part 1: Valve type and basic parameter
JB/T 1759-2010 — Valve components - Bushings
JB/T 1754-2008 — Valve components - Connector assemblies
6 Classification and status
International classification (ICS): 23.060
Chinese Standard Classification (CCS): J 16
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 1757
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 1757-2008 | Valve components - Ferrules and ferrule nuts | current edition | Current |
| JB/T 1758-1991 | Valve components - Ferrules and ferrule nuts | previous edition | Superseded |
This page sells the current edition, JB/T 1757-2008. Earlier editions are listed for reference only.
How to Download JB/T 1757-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 196-2003 — General purpose metric screw threads - Basic dimensions
GB/T 197-2003 — General purpose metric screw threads – Tolerances
JB/T 1757-2008
$145.00