Valid

JB/T 1700-2008Valve components - Nuts, bolts and plugs (English PDF)

阀门零部件 螺母、螺栓和螺塞

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 1700-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 1, 2008

Implementation date

July 1, 2008

Scope

JB/T 1700-2008 is the English-translated version of 阀门零部件 螺母、螺栓和螺塞.

Nuts, bolts and plugs for valves are the subject of JB/T 1700-2008, a recommended Chinese machinery industry standard. It specifies the structure, the dimensions, the materials and the requirements for locking nuts, compression nuts, T-bolts and hexagon plugs, and it applies to industrial valves.

Five earlier documents are recorded as superseded by it: JB/T 1700.1-1991, JB/T 1700.2-1991, JB/T 1706-1991, JB/T 1709-1991 and JB/T 1760-1991. Among the standards it quotes are GB/T 196-2003, GB/T 197-2003, GB/T 699-1999, GB/T 3077-1999 and GB/T 3098.1-2000. It sits under Chinese classification J16 and ICS 23.060.

Found what you need?

Document preview — JB/T 1700-2008

National Standard of the People's Republic of China

ICS
23.060
Replacing
JB/T 1700.2-1991

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 1700-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.

It is one of 3 parts of the JB/T 1700 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

Nuts, bolts and plugs for valves are the subject of JB/T 1700-2008, a recommended Chinese machinery industry standard. It specifies the structure, the dimensions, the materials and the requirements for locking nuts, compression nuts, T-bolts and hexagon plugs, and it applies to industrial valves. Five earlier documents are recorded as superseded by it: JB/T 1700.1-1991, JB/T 1700.2-1991, JB/T 1706-1991, JB/T 1709-1991 and JB/T 1760-1991. Among the standards it quotes are GB/T 196-2003, GB/T 197-2003, GB/T 699-1999, GB/T 3077-1999 and GB/T 3098.1-2000. It sits under Chinese classification J16 and ICS 23.060.

JB/T 1700-2008 falls under ICS 23.060, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 196-2003 — General purpose metric screw threads - Basic dimensions

GB/T 197-2003 — General purpose metric screw threads – Tolerances

GB/T 699-1999 — [Replaced by GB/T 699-2015] Quality carbon structural steels

GB/T 700-2006 — Carbon structural steels

GB/T 1220-1992 — Stainless steel bars

GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications

GB/T 3077-1999 — Alloy structure steels

GB/T 3098.1-2000 — Mechanical properties of fasteners. Bolts, screws and studs

GB/T 5779.1-2000 — Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements

GB/T 12226-2005 — General purpose industrial valve - Specification of flake graphite iron castings

4 Where this standard sits

It cites 10 standards, among them GB/T 196-2003, GB/T 197-2003, GB/T 699-1999, listed in full above.

It is one part of the JB/T 1700 series, of which this catalogue holds 3 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 1700.1-1991 — Lock nuts (1)

JB/T 1700.2-1991 — Lock nuts (2)

Standards on related subjects:

GB/T 8464-2023 — Cast iron, copper and stainless steel valves with screwed connections

HG/T 4304-2012 — Corrosion-resistant polyolefin (PO) plastic linings - Technical specifications

JB/T 106-2004 — Valves - Marking and painting

JB/T 1708-2010 — Valve components - Gland flanges, gland sleeves and gland plates

JB/T 1701-2010 — Valve components - Stem nuts

JB/T 1702-2008 — Components of valves - Bearing glands

7 Classification and status

International classification (ICS): 23.060

Chinese Standard Classification (CCS): J 16

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 1700

EditionTitleRevisionStatus
JB/T 1700-2008Valve components - Nuts, bolts and plugscurrent editionCurrent
JB/T 1700.2-1991Valve components - Nuts, bolts and plugsprevious editionSuperseded

This page sells the current edition, JB/T 1700-2008. Earlier editions are listed for reference only.

How to Download JB/T 1700-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 1700-2008

$135.00